Polymers

All Items

• Numerical investigation of the effect of constrained groove pressing process on the mechanical properties of polyamide PA66

  Mohammed Salah Bennouna, Sadek Kaddour, Benaoumeur Aour, Nadir Damba

  254-266

• NURBS-based kinematic limit analysis of FRP-reinforced masonry walls with out-of-plane loading

  Andrea Chiozzi, Nicola Grillanda, Gabriele Milani, Antonio Tralli

  9-23

• Double initial and caustic curves in diametrically compressed transparent discs - Application to the contact length

  Christos Markides

  451-470

• Prediction of thermomechanical behavior of acrylonitrile butadiene styrene using a newly developed nonlinear damage-reliability model

  Abderrazak En-naji, N. Mouhib, H. Farid, M. El Ghorba

  748-762

• Post- Impact Fatigue Damage Analysis of Quasi Isotropic CFRP Laminates through Infrared Thermography

  Raghu Vasu Prakash, Mathew John

  536-546

• A viscoelastic-viscoplastic model for a thermoplastic and sensitivity of its rheological parameters to the strain-rate

  Younès Saadallah, Semcheddine Derfouf, Belhi Guerira

  666-675

• Flexural testing and analysis of full-strain-fields in sandwich composites

  Rosa Marat-Mendes, Ricardo Martins, Alexandre Garcia, Luis Reis

  568-585

• Mixed mode fracture: numerical evaluation and experimental validation using PMMA specimens

  Sérgio Alexandre Gonçalves Pereira, Sérgio M.O. Tavares, Paulo M.S.T. de Castro

  412-428

• Tension - torsion fatigue tests on the proton exchange membrane Nafion 115 (Perfluorosulfonic acid)

  Gonzalo Mariano DOMINGUEZ ALMARAZ, Luis M. TORRES DUARTE, Christian J. TORRES PACHECO

  360-369

• Numerical analysis of the strain values obtained by FBG embedded in a composite material using assumptions about uniaxial stress state of the optical fiber and capillary on the Bragg grating

  Natalia Aleksandrovna Kosheleva, Valerii Matveenko, Grigorii Serovaev, Andrey Fedorov

  177-189

• Mechanical Behavior Analysis of a Friction Stir Welding (FSW) for Welded Joint Applied to Polymer Materials

  Hachellaf kaddour, Meddah Hadj Miloud, Ould Chikh El Bahri, Lounis Abdallah

  459-467

• Comparison of tensile strength and fracture toughness under mode I and II loading of co-cured and co-bonded CFRP joints

  Alessandro Pirondi, Fabrizio Moroni, Chiara Pernechele, Arturo Gaita, Luca Vescovi

  294-302

• Assessment of tensile and fatigue behavior of PEEK in a physiologically relevant environment

  Mirco Peron, Jan Torgersen, Filippo Berto

  425-436

• Elastoplastic and fracture behaviour of semi-crystalline polymers under multiaxial stress states

  Joao Pedro Manaia, Abílio M.P. Jesus, Francisco A. Pires

  82-103

• The impacts of type and proportion of five different asphalt modifiers on the low temperature fracture toughness and fracture energy of modified HMA

  Mehdi Fallah Tafti, Seyyed Abuzar Hoseini Aqda, Hamed Motamedi

  169-185

• Performance Index of Natural Stones-GFRP Hybrid Structures

  Luca Sorrentino, Costanzo Bellini, Wilma Polini, Sandro Turchetta

  285-294

• Experimental Research on the Instantaneous and Long-Term Deflections of Pre-Cracked Concrete Beams Enhanced by Carbon Fibre Reinforced Polymer

  Shiyong Jiang, Tao Cai, Shijuan Wu, Weilai Yao

  275-284

• Micro failure analysis of adhesively bonded joints enhanced with natural cork particles: Impact of overlap length and particles volume fraction

  Alireza Akhavan-Safar, Ana Queirós Barbosa, Lucas Filipe Martins da Silva, Majid Reza Ayatollahi

  266-274

• Mechanical and nanomechanical properties of MWCNT/PP nanocomposite

  Konstantinos Tserpes, A. Chanteli, Sp. Pantelakis, E.P. Koumoulos, C.A. Charitidis

  73-83

• Fatigue Behaviour and Mean Stress Effect of Thermoplastic Polymers and Composites

  Zongjin Lu, Bill Feng, Charlie Loh

  150-157

• Investigating the contribution of geometrical parameters and immersion time on fracture toughness of jute fabric composites using statistical techniques

  Dr. Bharath K N, G. B. Manjunatha

  14-24

• Influence of hydrothermal ageing on single lap bonded CFRP joints

  Costanzo Bellini, Gianluca Parodo, Wilma Polini, Luca Sorrentino

  173-182

• Residual life prediction of defected Polypropylene Random copolymer pipes (PPR)

  Abderazzak Ouardi, Fatima Majid, Nadia Mouhib, Mohamed Elghorba

  Pages 97-105

• Continuum damage modeling through theoretical and experimental pressure limit formulas

  Fatima Majid, Mohamed Elghorba

  Pages 79-89

• Dependence of mechanical characteristics from composition and structure and optimization of mechanical fracture energy of polymer composite material based on high-molecular rubbers

  E. Nurullaev, A. S. Ermilov, N. Yu. Lyubimova

  Pages 369-377

• On the use of length scale parameters to assess the static strength of notched 3D-printed PLA

  Adnan A. Ahmed, Luca Susmel

  Pages 252-259

• Strain monitoring of cement-based materials with embedded polyvinyl alcohol - carbon nanotube (PVA-CNT) fibers

  Zoi S. Metaxa, Wilfrid Neri, Philippe Poulin, Nikolaos D. Alexopoulos

  Pages 61-73

• Evaluation of the increased load bearing capacity of steel beams strengthened with pre-stressed FRP laminates

  S. Bennati, D. Colonna, P.S. Valvo

  Pages 377-391

• Effect of molding processes on multiaxial fatigue strength in short fibre reinforced polymer

  Takahiko Sawada, Hiroshi Aoyama

  Pages 92-98

• Novel magnetic composites based on water soluble unsaturated polyester resin and iron oxide nanoparticles

  Petar Velev, Rayna Bryaskova

  272-279

• New experimental techniques for fracture testing of highly deformable materials

  E. Dall’Asta, V. Ghizzardi, R. Brighenti, E. Romeo, R. Roncella, A. Spagnoli

  pages 161-171

• Crack initiation and propagation on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing

  G. M. Domínguez Almaraz, E. Correa Gómez, J.C. Verduzco Juárez, J.L. Avila Ambriz

• Fatigue crack propagation in short-fiber reinforced plastics

  K. Tanaka, K. Oharada, D. Yamada, K. Shimizu

• Analytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint

  M. Ševcík, P. Hutar, A. P. Vassilopoulos, M. Shahverdi

• A critical review of fracture mechanics as a tool for multiaxial fatigue life prediction of plastics

  Anders Winkler, Gertjan Kloosterman

  pages 262-288

• On the improved adhesion of NiTi wires embedded in polyester and vinylester resins

  Mattia Merlin, Martina Scoponi, Chiara Soffritti, Annalisa Fortini, Raffaella Rizzoni, Gian Luca Garagnani

  pages 127-137

• Dependence of the mechanical fracture energy of the polymeric composite material from the mixture of filler fractions

  E. M. Nurullaev, A. S. Ermilov

  pages 120-126

• Photoelastic stress analysis assisted evaluation of fracture toughness in hydrothermally aged epoxies

  G. Pitarresi, A. Toscano, M. Scafidi, M. Di Filippo, S. Alessi, G. Spadaro

  pages 127-137

• Interlaminar fracture in woven carbon/epoxy laminates

  Paulo N.B. Reis, José A.M. Ferreira, José D.M. Costa, António M. Pereira

  pages 431-438

• Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation

  D. Tumino, T. Ingrassia, V. Nigrelli, G. Pitarresi, V. Urso Miano

  pages 317-326

• The notch effect on fracture of polyurethane materials

  T. Voiconi, R. Negru, E. Linul, L. Marsavina, H. Filipescu

  pages 101-108

• Experimental investigation of fibre reinforced plastics with hybrid layups under high-velocity impact loads

  Marco Romano, Carl J. J. Hoinkes, Ingo Ehrlich, Johann Höcherl, Norbert Gebbeken

  pages 385-398

• Development of biodegradable magnesium alloy stents with coating

  Lorenza Petrini, Wei Wu, Dario Gastaldi, Lina Altomare, Silvia Farè, Francesco Migliavacca, Ali Gökhan Demir, Barbara Previtali, Maurizio Vedani

  pages 364-375

• Prediction of the pull-out strength of chemical anchors in natural stone

  L. Contrafatto, R. Cosenza

  pages 196-208

• Optimization of fractional composition of the excipient in the elastomeric covering for asphalt highways

  E.M. Nurullaev, A. S. Ermilov

  Pages 69-74

• A mechanical model for FRP-strengthened beams in bending

  S. Bennati, N. Dardano, P. S. Valvo

  pages 39-55