Additive Manufactured Materials

All Items

• Optimization of the internal structure of 3D-printed components for architectural restoration

  Valentina Tomei, Ernesto Grande, Maura Imbimbo

  227-241

• Effect of printing process parameters on tensile strength and wear rate of 17-4PH stainless steel deposited using SLM process

  Priya Sahadevan , Pon Selvan Chithirai, Avinash Lakshmikanthan, Amiya Bhaumik, Agustin Flores Cuautle

  157-176

• Predicting Damage in Notched Functionally Graded Materials Plates through extended Finite Element Method based on computational simulations

  Hakim Siguerdjidjene, Amin Houari, Kouider Madani, Salah Amroune, Mohamed Mokhtari, Barhm Mohamad, Chellil Ahmed, Abdelkrim Merah, Raul Campilho

  1-23

• Titanium/FRP hybrid sandwich: in-plane flexural behaviour of short beam specimens

  Costanzo Bellini, Rosario Borrelli, Vittorio Di Cocco, Stefania Franchitti, Francesco Iacoviello, Larisa Patricia Mocanu, Luca Sorrentino

  18-28

• Numerical Cohesive Zone Modeling (CZM) of Self-Anchoring AM Metal-CFRP joints

  Fikret Enes Altunok , Giorgio De Pasquale

  280-295

• A method for rapid estimation of residual stresses in metal samples produced by additive manufacturing

  Alexey Fedorenko, Denis Firsov, Stanislav Evlashin, Boris Fedulov, Evgeny Lomakin

  267-279

• Evolution of prototyping in automotive engineering: a Comprehensive Study on the reliability of Additive Manufacturing for advanced powertrain components

  Silvia Cecchel, Riccardo Ferraresi, Matteo Magni, Leonardo Guerini, Giovanna Cornacchia

  109-126

• Fracture Load Estimations for U-Notched and V-Notched 3D Printed PLA and Graphene-Reinforced PLA plates using the ASED Criterion

  Marcos Sánchez, Sergio Arrieta, Sergio Cicero

  322-338

• Notch Sensitivity Study in U-notched Polymers Built by Additive Manufacturing (AM)

  Jorge Guillermo Diaz Rodriguez, Alberto David Pertuz Comas, Juan David Sandoval Herrera

  127-139

• High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering

  Paolo Ferro, Alberto Fabrizi, Franco Bonollo, H.S.A. Elsayed, Filippo Berto, Gianpaolo Savio

  246-256

• Effect of date palm and polypropylene fibers on the characteristics of self-compacting concretes: comparative study

  Dounia Derdour, Mourad Behim, Mohammed Benzerara

  31-50

• Delamination effect on the mechanical behavior of 3D printed polymers

  Fatima Majid, T. Hachimi, H. Rhanim, R. Rhanim

  26-36

• Analysis of the resistance to crack propagation in SENT test specimens printed in ABS using parallel or crossed filaments between layers

  Oumaima Aourik, Abdelkerim Chouaf, Mourad Othmani

  246-256

• Compressive behavior of Co-Cr-Mo radially graded porous structures under as-built and heat-treated conditions

  Francesco Cantaboni, Paola Ginestra, Marialaura Tocci, Andrea Avanzini, Elisabetta Ceretti, Annalisa Pola

  490-504

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  26-53

• Damage assessment of different FDM-processed materials adopting Infrared Thermography

  Danilo D'Andrea, Giacomo Risitano, Marcello Raffaele, Filippo Cucinotta, Dario Santonocito

  75-90

• Effect of parent concrete strength on recycled concrete performance

  Bachir Kebaili, Mohammed Benzerara, Souad Menadi, Nadia Kouider, Redjem Belouettar

  14-25

• Valorization and recycling of packaging belts and post-consumer PET bottles in the manufacture of sand concrete

  Yasmina Biskri, Mohammed Benzerara, Laidi Babouri, Ouided Dehas , Redjem Belouettar

  225-239

• Flexural behavior of delta and bi-delta cold-formed steel beams: experimental investigation and numerical analysis

  Yazid Hadidane, Nadia Kouider, Mohammed Benzerara

  69-88

• Effect of reinforcement type on structural behavior of RC beams containing recycled aggregate

  Rasha Elsadany, Sherif H. Al-Tersawy, Hossam El-Din M. Sallam

  294-307

• The investigation of additive manufacturing and moldable materials to produce railway ballast grain analogs

  Bence Szabó, L. Pásthy, Á. Orosz, K. Tamás

  213-228

• Microstructure and anisotropic tensile performance of 316L stainless steel manufactured by selective laser melting

  Lin Wang

  380-391

• Recycling of plastic waste polyethylene terephthalate (PET) as a modifier in asphalt mixture: study of Creep-Recovery at Low, Medium, and Hot Temperatures

  Amine Bekhedda, M’hammed Merbouh

  438-450

• Reinforced Soft Soil by CSV with/without Polypropylene fibres: Experimental and Numerical analysis.

  Anouar Souadeuk, Zeineddine Boudaoud

  374-395

• Crack prediction in beam-like structure using ANN based on frequency analysis

  Meriem Seguini, Nedjar Djamel, Boutchicha Djilali, Samir Khatir, Magd Abdel Wahab

  18-34

• Influence of 3d-printing parameters on the mechanical properties of 17-4PH stainless steel produced through Selective Laser Melting

  Francesca Romana Andreacola, Ilaria Capasso, Letizia Pilotti, Giuseppe Brando

  282-295

• Finite Element analysis of stress state in the cement of total hip prosthesis with elastomeric stress barrier

  Allaoua Fadela , Lebbal Habib, Belarbi Abderrahmane

  281-290

• Optimization of Ultimate Tensile Strength with DOE Approach for Application FSW Process in the Aluminum alloys AA6061-T651 & AA7075 -T651

  Mohammed Chaib , Abdelkader Slimane, Sid Ahmed Slimane , Abdelakder Ziadi , Benattou Bouchouicha

  169-181

• Optimization of High-Performance-Concrete properties containing fine recycled aggregates using mixture design modeling

  Tounsia Boudina, Dalila Benamara, Rebih Zaitri

  50-62

• Development of mathematical model and optimization of GMA welding parameters of IS 2062 grade A steel weldments

  Saadat Ali Rizvi, Wajahat Ali

  84-93

• Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite Bimatallic components for lightweight design

  Paolo Ferro, Alberto Fabrizi, Franco Bonollo, Filippo Berto

  289-301

• Mechanical performance of intelligent asphalt mixture utilizing rejuvenator encapsulated method

  Sari Sharif Ali, Mahyar Arabani, Hassan Latifi

  187-197

• Fatigue Behavior of Metallic Components Obtained by Topology Optimization for Additive Manufacturing

  F.K. Fiorentin, B. Oliveira, J.C.R. Pereira, J.A.F.O. Correia, Abilio M.P. de Jesus, F. Berto

  119-135

• Understanding powder bed fusion additive manufacturing phenomena via numerical simulation

  Paolo Ferro, Filippo Berto, Luca Romanin

  252-284

• Evaluating Properties of Asphalt Mixtures Containing polymers of Styrene Butadiene Rubber (SBR) and recycled Polyethylene Terephthalate (rPET) against Failures Caused by Rutting, Moisture and Fatigue

  Mahmoud Ameri, Reza Mohammadi, Milad Mousavinezhad, Amirhossein Ameri, Hamid Shaker, Arash Fasihpour

  177-186

• Fatigue Analysis of Bitumen Modified with Composite of Nano-SiO2 and Styrene Butadiene Styrene Polymer

  Sajad Rezaei, Seyed Mohsen Damadi, Ali Edrisi, Mansour Fakhri, Mohammad Worya Khordehbinan

  202-209

• Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy

  Carlos Navarro Pintado, Jesús Vázquez, Jaime Domínguez, Antonio Periñán, Marta Herrera García, Fernando Lasagni, Simon Bernarding, Sebastian Slawik, Frank Mücklich, Francisco Boby, Lloyd Hackel

  337-344

• Effect of aggregate type on moisture susceptibility of modified cold recycled mix asphalt: evaluation by mechanical tests and Surface Free Energy method

  Hassan Latifi, Nahid Amini

  211-229

• Study on the thermal cycle of Wire Arc Additive Manufactured (WAAM) carbon steel wall using numerical simulation

  Mohsen Saadatmand, Reza Talemi

  98-104

• Local scale fracture characterization of an advanced structured material manufactured by fused deposition modeling in 3D printing.

  Joseph Marae Djouda, Donato Gallittelli , Marouene Zouaoui, Ali Makke, Julien Gardan , Naman Recho, Jérôme Crépin

  534-540

• Use of by-products for partial replacement of 3D printed concrete constituents; rheology, strength and shrinkage performance

  Michail Papachristoforou, Vasilios Mitsopoulos, Maria Stefanidou

  526-536

• Experimental and numerical study on the influence of critical 3D printing processing parameters

  Nikoletta Chatzidai, Dimitrios Karalekas

  407-413

• Investigating the contribution of geometry on the failure of cellular core structures obtained by additive manufacturing

  Hugo Araújo, Marco Leite, AMR Ribeiro, Augusto M Deus, Luis Reis, M Fatima Vaz

  478-486

• Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA

  Carlos Vicente, João Fernandes, Augusto Deus, Maria Vaz, Marco Leite, Luis Reis

  748-756

• Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading

  Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto

  18-25

• Effect of corrosion and fatigue on the remaining life of structures and its implication to additive manufacturing

  Filippo Berto, Javad Razavi, Rhys Jones, D. Peng

  33-44

• A numerical and experimental study through laser thermography for defect detection on metal additive manufactured parts

  N. Montinaro, D. Cerniglia, G. Pitarresi

  Pages 231-240

• Frontiers of fracture and fatigue: Some recent applications of the local strain energy density

  F. Berto, S.M.J. Razavi, J. Torgersen

  Pages 1-32

• On the use of length scale parameters to assess the static strength of notched 3D-printed PLA

  Adnan A. Ahmed, Luca Susmel

  Pages 252-259