Vol. 18 No. 70 (2024): October 2024

Don’t forget the next IGF event: The 8th International Conference on Crack Paths (CP2024).

The Conference will be held in Rimini (Italy) and online on September 10-12, 2024 (https://www.crackpaths.org). This Conference follows the Conferences in Parma in 2003 and 2006, Vicenza in 2009, Gaeta in 2012, Ferrara in 2015, Verona in 2018 and online in 2021.

The deadlines are:

Always open: Registration
31.07.2024: Abstracts submission
31.07.2024: Acceptance notification
15.08.2024: Early bird registration and payment
10.09.2024 to 12.09.2024: Conference
30.09.2024: Papers submission (after the Conference)
15.10.2024: Papers acceptance

Published: 03-07-2024

Analytical, computational and physical models

Modeling turning performance of Inconel 718 with hybrid nanofluid under MQL using ANN and ANFIS

Paresh Kulkarni, Satish Chinchanikar

71-90
- PDF
- Visual Abstract
Numerical study of the influence of the parameters of statistical distribution of the structural elements’ ultimate strength on deformable bodies’ fracture processes

Eugeniia Feklistova, Artur Mugatarov, Valeriy Wildemann

105-120
- PDF
- Visual Abstract

Damage mechanics

ANSYS implementation of the phase field fracture approach

Dmitry Kosov, Andrey Tumanov, Valery Shlyannikov

133-156
- PDF
- Visual Abstract

Failure Analysis and Forensic Engineering

Tool wear evaluation of self-propelled rotary tool and conventional round tool during turning Inconel 718

Satish Chinchanikar, Nitin Motgi

242-256
- PDF
- Visual Abstract

Fatigue and Fracture of non metallic materials

Predicting Damage in Notched Functionally Graded Materials Plates through extended Finite Element Method based on computational simulations

Hakim Siguerdjidjene, Amin Houari, Kouider Madani, Salah Amroune, Mohamed Mokhtari, Barhm Mohamad, Chellil Ahmed, Abdelkrim Merah, Raul Campilho

1-23
- PDF
- Visual Abstract
Impact of hybrid nanoparticle reinforcements on Mechanical properties of Epoxy-Polylactic Acid (PLA) Composites Impact of hybrid nanoparticle reinforcements on Mechanical properties of Epoxy-Polylactic Acid (PLA) Composites

M. A. Umarfarooq, K. Dileep, A. Srinath, N.R. Banapurmath, Ashok M. Sajjan

91-104
- PDF
- Visual Abstract

Integrity of materials and structures

Effect of printing process parameters on tensile strength and wear rate of 17-4PH stainless steel deposited using SLM process

Priya Sahadevan , Pon Selvan Chithirai, Avinash Lakshmikanthan, Amiya Bhaumik, Agustin Flores Cuautle

157-176
- PDF
- Visual Abstract
Correlation coefficients of vibration signals and machine learning algorithm for structural damage assessment in beams under moving load

Toan Pham Bao, Vien Le-Ngoc

55-70
- PDF
- Visual Abstract
Optimization of the internal structure of 3D-printed components for architectural restoration

Valentina Tomei, Ernesto Grande, Maura Imbimbo

227-241
- PDF
- Visual Abstract
An interface-based microscopic model for the failure analysis of masonry structures reinforced with timber retrofit solutions

Fabrizio Greco, Lorenzo Leonetti, Paolo Lonetti, Paolo Nevone Blasi, Arturo Pascuzzo, Giacinto Porco

210-226
- PDF
- Visual Abstract

SI: Russian mechanics contributions for Structural Integrity

Application of deep learning for technological parameter optimization of laser shock peening of Ti-6Al-4V alloy

Mikhail Verezhak, Aleksei Vshivkov, Elena Gachegova, Maria Bartolomei, Alexander Mayer, Sathya Swaroop

121-132
- PDF
- Visual Abstract
Elastic-viscoplastic deformation models of salt rocks

Alexander Baryakh, Andrey Tsayukov

191-209
- PDF
- Visual Abstract

SI: New Trends in Structural Health Monitoring

Introduction and application of a drive-by damage detection methodology for bridges using variational mode decomposition

Shahrooz Khalkhali Shandiz, Hamed Khezrzadeh, Saeed Eftekhar Azam

24-54
- PDF
- Visual Abstract
Enhancing Generalizability of a Machine Learning Model for Infrared Thermographic Defect Detection by Using 3D Numerical Modeling

Vladimir Vavilov, Arsenii Chulkov, Alexey Moskovchenko

177-191
- PDF
- Visual Abstract

Vol. 18 No. 70 (2024): October 2024

Analytical, computational and physical models

Modeling turning performance of Inconel 718 with hybrid nanofluid under MQL using ANN and ANFIS

Numerical study of the influence of the parameters of statistical distribution of the structural elements’ ultimate strength on deformable bodies’ fracture processes

Damage mechanics

ANSYS implementation of the phase field fracture approach

Failure Analysis and Forensic Engineering

Tool wear evaluation of self-propelled rotary tool and conventional round tool during turning Inconel 718

Fatigue and Fracture of non metallic materials

Predicting Damage in Notched Functionally Graded Materials Plates through extended Finite Element Method based on computational simulations

Impact of hybrid nanoparticle reinforcements on Mechanical properties of Epoxy-Polylactic Acid (PLA) Composites Impact of hybrid nanoparticle reinforcements on Mechanical properties of Epoxy-Polylactic Acid (PLA) Composites

Integrity of materials and structures

Effect of printing process parameters on tensile strength and wear rate of 17-4PH stainless steel deposited using SLM process

Correlation coefficients of vibration signals and machine learning algorithm for structural damage assessment in beams under moving load

Optimization of the internal structure of 3D-printed components for architectural restoration

An interface-based microscopic model for the failure analysis of masonry structures reinforced with timber retrofit solutions

SI: Russian mechanics contributions for Structural Integrity

Application of deep learning for technological parameter optimization of laser shock peening of Ti-6Al-4V alloy

Elastic-viscoplastic deformation models of salt rocks

SI: New Trends in Structural Health Monitoring

Introduction and application of a drive-by damage detection methodology for bridges using variational mode decomposition

Enhancing Generalizability of a Machine Learning Model for Infrared Thermographic Defect Detection by Using 3D Numerical Modeling

2023 CiteScore & Impact Factor

DOAJ

CP2024

Information

homepageinfo

Gruppo Italiano Frattura (IGF)

headerslider

bottomslider

Browse

Users reports

Latest publications