Fatigue crack propagation in short-fiber reinforced plastics
DOI:
https://doi.org/10.3221/IGF-ESIS.34.33Keywords:
Fatigue crack propagationAbstract
The influence of fiber orientation on the crack propagation behavior was studied with single edgenotched
specimens which were cut from an injection-molded plate of short-fiber reinforced plastics of
polyphenylenesulphide (PPS) reinforced with 30wt% carbon fibers. Specimens were cut at five fiber angles relative to the molding direction, i.e. ??= 0° (MD), 22.5°, 45°, 67.5°, 90° (TD). Fracture mechanics parameters derived based on anisotropic elasticity were used as a crack driving force. Macroscopic crack propagation path was nearly perpendicular to the loading axis for the cases of MD and TD. For the other fiber angles, the crack path was inclined because the crack tended to propagate along inclined fibers. For mode I crack propagation in MD and TD, the resistance to crack propagation is improved by fiber reinforcement, when the rate is correlated to the range of stress intensity factor. The crack propagation rate, da/dN, was slowest for MD and fastest for TD. For each material, the crack propagation rate is higher for larger R ratio. The effect of R ratio on da/dN diminished in the relation between da/dN and the range of energy release rate, ?GI. Difference among MD, TD and matrix resin becomes small when da/dN correlated to a parameter corresponding the crack-tip radius, H?GI, where H is compliance parameter. Fatigue cracks propagated under mixed loading of mode I and II for the fiber angles other than 0° and 90°. The data of the crack propagation rate correlated to the range of total energy release rate, ?Gtotal, lie between the relations obtained for MD and TD. All data of crack propagation tend to merge a single relation when the rate is correlated to the range of total energy release rate divided by Young’s modulus.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.