Fractography and Advanced Metallography

All Items

• The Impact of nanoparticles (B4C-Al2O3) on mechanical, wear, fracture behavior and machining properties of formwork grade Al7075 composites

  T. B. Prakash, M. Gangadharappa, Santhosh Somashekar, M. Ravikumar

  210-226

• Fractography and Tensile studies on the effect of different carbon fillers reinforced hybrid nanocomposites

  Balachandra P. Shetty, G. J. Naveen

  220-232

• Study on Micro-structure, Hardness and Optimization of Wear Characteristics of Al6061/TiB2/CeO2 Hotrolled MMCs using Taguchi Method

  S. R. Sreenivasa Iyengar, D. Sethuramu; M. Ravikumar

  178-193

• Investigation on Microstructure, Hardness, Wear behavior and Fracture Surface Analysis of Strontium (Sr) and Calcium (Ca) Content A357 Modified Alloy by Statistical Technique

  K. Ganesh, K. Hemachandra Reddy, S. Sudhakar Babu, R Suresh

  32-46

• Mechanical and Fractured surface characterization of epoxy/red mud/fly ash/ aluminium powder filled hybrid composites for automotive applications

  K. C. Anil , A.B. Hemavathi, A. Adeebpasha

  93-103

• Investigation on Microstructure and Tensile Fractography of RE Oxides (CeO2/Y2O3) Reinforced AZ91D Magnesium Matrix Composites

  Santhosh Gotagunaki, Vardhaman S. Mudakappanavar, R. Suresh

  100-109

• Influence of Quenching Agents on Mechanical, Wear, and Fracture Characteristics of Al2O3 / MoS2 Reinforced Al-6061 Hybrid Metal Matrix Composite (MMCs)

  K. R. Suchendra, M. Sreenivasa Reddy; M. Ravikumar

  122-133

• Study of the slant fracture in solid and hollow cylinders: Experimental analysis and numerical prediction

  Nassima Ben Chabane, Nassim Aguechari, Mohand Ould Ouali

  169-189

• Impact behaviour and fractography of 6061 alloy with Trace addition of Sn

  Monoj Baruah, Anil Borah

  126-133

• Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue and Graphite Reinforced Aluminium Hybrid Composites

  K. C. Anil, J. Kumaraswamy, Mahadeva Reddy, Bhograj Prakash

  168-179

• Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites

  M. Ravikumar, Rudra Nail

  439-447

• A Study on microstructure, mechanical and fracture behavior of Al2O3 - MoS2 reinforced Al6061 hybrid composite

  K. R. Suchendra, Reddy M Sreenivasa; M. Ravikumar

  244-253

• Identification of the anisotropic behavior of the laser welded Interstitial Free steel HC260Y subjected to uniaxial tensile tests

  Latifa Arfaoui, Amel Samet, Amna Znaidi

  282-293

• Synthesis and Characterization of Fe2O3 Nanoparticles Reinforced to Recycled Industrial Aluminium Scrap & Waste Aluminium Beverage Cans for Preparing Metal Matrix Nanocomposites

  Ganesh R. Chate, Raviraj M. Kulkarni, Manjunath Patel Gowdru Chandrashekarappa, Avinash Lakshmikanthan, H.M. Harsha, Simran Tophakhane, Nazafali Shaikh, Suman Kongi, Pouravi Iranavar

  229-242

• Study on Micro - Nano Sized Al2O3 Particles on Mechanical, Wear and Fracture Behavior of Al7075 Metal Matrix Composites

  M. Ravikumar, H. N. Reddappa, R. Suresh, E. R. Babu, C. R. Nagaraja

  166-178

• Fractographic characterization of Al2O3p particulates reinforced Al2014 alloy composites subjected to tensile loading

  V. Bharath, V. Auradi, Madeva Nagaral

  14-23

• Development of mathematical model and optimization of GMA welding parameters of IS 2062 grade A steel weldments

  Saadat Ali Rizvi, Wajahat Ali

  84-93

• Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques

  M. Ravikumar, R. Suresh, H. N. Reddappa, Y. S. Ram Mohan, C. R. Nagaraja, E. R. Babu

  160-170

• Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy

  Carlos Navarro Pintado, Jesús Vázquez, Jaime Domínguez, Antonio Periñán, Marta Herrera García, Fernando Lasagni, Simon Bernarding, Sebastian Slawik, Frank Mücklich, Francisco Boby, Lloyd Hackel

  337-344

• Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging

  Andrew Gryguc, Sugrib Kumar Shaha, Seyed Behzad Behravesh, Hamid Jahed, Mary Wells, Bruce Williams

  152-165

• Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS

  Annalisa Pola, Davide Battini, Marialaura Tocci, Andrea Avanzini, Luca Girelli, Candida Petrogalli, Marcello Gelfi

  775-790

• Initial orientation of the fretting fatigue cracks in shrink-fit connection specimens

  Ciro Santus

  442-450

• Characterization and Tensile Fractography of Nano ZrO2 Reinforced Copper-Zinc Alloy Composites

  Madeva Nagaral, Prasad H. Nayak, H. K. Srinivas, V. Auradi

  370-376

• Influence of microstructure on fatigue property of ultra high-strength steels

  Kanji OKUDA, Kazuhiro OGAWA, Yuji ICHIKAWA, Tsuyoshi SHIOZAKI, Naoki YAMAGUCHI

  125-134

• Numerical modelling of residual stress redistribution induced by TIG-dressing TIG-dressing numerical modelling

  Paolo Ferro, Filippo Berto, Franco Bonollo, Roberto Montanari

  221-230

• Multiaxial fatigue of in-service aluminium longerons for helicopter rotor-blades

  A. Shanyavskiy, A. Toushentsov

  Pages 399-404

• Evaluation of cavitation erosion resistance of Al-Si casting alloys: effect of eutectic and intermetallic phases

  Marialaura Tocci, Annalisa Pola, Lorenzo Montesano, G. Marina La Vecchia

  Pages 218-230

• Characterization of uniaxial fatigue behavior of precipitate strengthened Cu-Ni-Si alloy (SICLANIC(TM))

  B. Saadouki, M. Elghorba, PH. Pelca, T. Sapanathan, M. Rachik

  Pages 133-145

• Multiaxial fatigue of in-service aluminium longerons for helicopter rotor-blades

  A. Shanyavskiy, A. Toushentsov

  22-27

• Fatigue crack growth behavior of Inconel 718 produced by selective laser melting

  R. Konecná, L. Kunz, G. Nicoletto, A. Baca

  pages 31-40

• Relation between the plastic instability and fracture of tensile tested Cu-Sn alloys investigated with the application of acoustic emission technique

  W. Ozgowicz, B. Grzegorczyk, A. Pawelek, W. Wajda, W. Skuza, A. Piatkowski, Z. Ranachowski

  pages 11-20

• Experimental investigation of crack initiation and propagation in high- and gigacycle fatigue in titanium alloys by study of morphology of fracture

  M.V. Bannikov, O. B. Naimark, V.A. Oborin

  pages 51-56

• Microstructure dependence of fatigue crack propagation behavior in wrought magnesium alloy

  S. Morita, S. Fujiwara, T. Hori, N. Hattori, H. Somekawa, T. Mayama

  pages 82-87

• Controlling fatigue crack paths for crack surface marking and growth investigations

  S. Barter, P. White, M. Burchill

  pages 132-141

• Crack initiation and fracture features of Fe–Co–B–Si–Nb bulk metallic glass during compression

  S. Lesz, A. Januszka, S. Griner, R. Nowosielski

  pages 206-212

• Crack path in liquid metal embrittlement: experiments with steels and modeling

  T. Auger, S. Hémery, M. Bourcier, C. Berdin, M. Martin, I. Robertson

  pages 250-259

• Development of in-situ fatigue crack observing system for rotating bending fatigue testing machine

  B. Lian, A. Ueno, T. Iwashita

  pages 389-395

• Short review: Potential impact of delamination cracks on fracture toughness of structural materials

  X.C. Arnoult, M. Ružicková, K. Kunzová, A. Materna

  pages 509-522

• Growth behavior of fatigue cracks in ultrafine grained Cu smooth specimens with a small hole

  Masahiro Goto, Kakeru Morita, Junichi Kitamura, Takaei Yamamoto, Masataka Baba, Seung-zeon Han, Sangshik Kim

• Multiscale study of fracture in aluminum-magnesium alloy under fatigue and dynamic loading

  Vladimir Oborin, Mikhail Bannikov, Oleg Naimark, Mikhail Sokovikov, Dmitry Bilalov

• EBSD-assisted fractographic analysis of crack paths in magnesium alloy

  S. Takaya, Y. Uematsu, T. Kakiuchi

• Effect of inhomogeneous distribution of non-metallic inclusions on crack path deflection in G42CrMo4 steel at different loading rates

  S. Henschel, L. Krüger

• Fracture morphology and its evolution A review on crack path stability and brittle fracture along butt-weld

  Y. Sumi

• Microstructural study of multiaxial low cycle fatigue

  Masao Sakane, Takamoto Itoh

  pages 319-334

• Role of the microstructure on the mechanical properties of fully pearlitic eutectoid steels

  J. Toribio, B. González, J.C. Matos, F.J. Ayaso

  pages 424-430

• Crack propagation mechanism and life prediction for very-highcycle fatigue of a structural steel in different environmental medias

  Guian Qian, Chengen Zhou, Youshi Hong

  Pages 7-14

• Effect of weld parameter on mechanical and metallurgical properties of dissimilar joints AA6082–AA6061 in T6 condition produced by FSW

  H. S. Patil, S. N. Soman

  Pages 151-160

• Study of the conditions of fracture at explosive compaction of powders

  Andrey E. Buzyurkin, Evgeny I. Kraus, Yaroslav L. Lukyanov

  Pages 96-111

• On the preparation and characterization of thin NiTi shape memory alloy wires for MEMS

  Riccardo Casati, Maurizio Vedani, Syed A. M. Tofail, Calum Dikinson, Ausonio Tuissi

  Pages 7-12

• Sn and Ti influences on intermetallic phases damage in hot dip galvanizing

  V. Di Cocco

  pages 31-38