Alloys: Ti alloys

All Items

• Application of deep learning for technological parameter optimization of laser shock peening of Ti-6Al-4V alloy

  Mikhail Verezhak, Aleksei Vshivkov, Elena Gachegova, Maria Bartolomei, Alexander Mayer, Sathya Swaroop

  121-132

• Predictive Modeling of Fracture Behavior in Ti6Al4V Alloys Manufactured by SLM Process

  Mohsen Sarparast, Majid Shafaie, Mohammad Davoodi, Ahmad Memaran Babakan, Hongyan Zhang

  340-356

• Material choice to optimise the performance index of isogrid structures

  Costanzo Bellini, Filippo Berto, Vittorio Di Cocco, Francesco Iacoviello, Larisa Patricia Mocanu

  231-239

• Finite-element simulation of residual stresses induced by laser shock peening in TC4 samples structurally similar to a turbine blade

  Anastasiia Kostina, Maxim Zhelnin, Sathya Swaroop, Alena Vedernikova, Mariia Bartolomei

  1-11

• Optimization of S-N curve fitting based on neighborhood rough set reduction with improved firefly algorithm

  Yangjinyu Li, Li Zou, Zhengjie Zhu

  250-265

• Efficiency of shape memory alloy seismic restrainers for several conditions of bridge joints

  Mohamed Hamdy El-Feky, Atef Eraky, Alaa M. Sharabash

  104-120

• Finite-element study of residual stress distribution in Ti-6Al-4V alloy treated by laser shock peening with varying parameters

  Anastasiia Kostina, Maxim Zhelnin, Elena Gachegova, Alexander Prokhorov, Aleksei Vshivkov, Oleg Plekhov, Sathya Swaroop

  419-436

• Fatigue growth rate of inclined surface cracks in aluminum and titanium alloys

  Rustam Yarullin, Mikhail Yakovlev

  451-463

• Numerical analysis of the elastic-plastic behavior of a tubular structure in FGM under pressure and defect presence

  Kouider Madani, A. Houari, A.S. Bouchikhi, M. Mokhtari

  212-231

• Effect of Gaseous carburizing thermochemical treatment on tribological behavior of Ti–6Al–4V alloy

  Fedaoui Kamel, Amar Talhi, Mohamed Zine Touhami

  179-190

• Influence of the applied layer on the state of stress in a bimetallic perforated plate under two load variants

  Mateusz Konieczny, Grzegorz Gasiak, Henryk Achtelik

  137-150

• Experimental analysis of the state of stress in a steel – titanium perforated plate loaded with concentrated force

  Mateusz Konieczny, Grzegorz Gasiak, Henryk Achtelik

  277-288

• Research of stress distribution in the cross-section of a bimetallic perforated plate perpendicularly loaded with concentrated force

  Mateusz Konieczny, Henryk Achtelik, Grzegorz Gasiak

  241-257

• Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy

  Carlos Navarro Pintado, Jesús Vázquez, Jaime Domínguez, Antonio Periñán, Marta Herrera García, Fernando Lasagni, Simon Bernarding, Sebastian Slawik, Frank Mücklich, Francisco Boby, Lloyd Hackel

  337-344

• Stress intensity factors for mixed-mode crack growth in imitation models under biaxial loading

  Rustam Yarullin, V.N. Shlyannikov, I.S. Ishtyriakov, M.M. Yakovlev

  210-222

• Experimental characterisation of fatigue crack growth based on the CTOD measured from crack tip displacement fields using DIC

  José Manuel Vasco Olmo, F.A. Díaz, F.V. Antunes, M.N. James

• The effect of fatigue crack rate on the heat dissipation in metals under mixed-mode loading

  Aleksei Vshivkov, Oleg Plekhov

  1-9

• Comparative study of Shot creep of single-phase titanium alloys in air and neutral gas environment on the test temperature in range from 673 to 1323 K

  lev Michailovich Zamaraev, Sergey Smirnov

  201-211

• The approach to fracture diagnosis by means of experimental measurements of the stored energy

  Alena Vedernikova, A. Iziumova, A. Vshivkov, Oleg Plekhov

  314-320

• In-plane anisotropy in deformation micro-mechanism of commercially pure titanium during monotonic tension and cyclic loading

  Atasi Ghosh

  585-598

• Multi-axial fatigue numerical crack propagation in cruciform specimens

  Venanzio Giannella, Michele Perrella

  639-647

• A model of energy dissipation at fatigue crack tip in metals

  Aleksei Vshivkov, Oleg Plekhov, Anastasiia Iziumova, Balasubramaniam Venkatraman

  451-458

• Characterizations of TIG welded joints of Unalloyed Commercially Pure Titanium Gr-2 for Weld Process Parameters

  Hiralal S. Patil, D. C PATEL, C. S PATIL

  377-384

• Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading

  Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto

  18-25

• The experimental study of heat dissipation during fatigue crack propagation under biaxial loading

  Aleksei Vshivkov, Oleg Plekhov, Anastasiia Iziumova, Aleksandr Zakharov, Valery Shlyannikov

  50-57

• Effect of corrosion and fatigue on the remaining life of structures and its implication to additive manufacturing

  Filippo Berto, Javad Razavi, Rhys Jones, D. Peng

  33-44

• Fatigue assessment of Ti-6Al-4V titanium alloy laser welded joints in absence of filler material by means of full-field techniques

  Pasqualino Corigliano, Vincenzo Crupi, Eugenio Guglielmino, Carmine Maletta, Emanuele Sgambitterra, Giuseppe Barbieri, Fabrizia Caiazzo

  Pages 171-181

• Identification of fatigue and mechanical characteristics of explosively welded steel - titanium composite

  M. Kowalski

  Pages 85-92

• Crack initiation life in notched Ti-6Al-4V titanium bars under uniaxial and multiaxial fatigue: synthesis based on the averaged strain energy density approach

  Giovanni Meneghetti, Alberto Campagnolo, Filippo Berto, Keisuke Tanaka

  Pages 8-15

• Multiaxial fatigue strength of titanium alloys

  Filippo Berto, Alberto Campagnolo, Torgeir Welo, Sabrina Vantadori, Andrea Carpinteri

  Pages 79-89

• Experimental methodology for the quantification of crack tip plastic zone and shape from the analysis of displacement fields

  J.M. Vasco-Olmo, F.A. Diaz, M.N. James, C.J. Christopher, E.A. Patterson

  Pages 166-174

• Fatigue life prediction of pedicle screw for spinal surgery

  Š. Major, V. Kocour, P. Cyrus

  pages 379-388

• Crack path in aeronautical titanium alloy under ultrasonic torsion loading

  A. Nikitin, C. Bathias, T. Palin-Luc, A. Shanyavskiy

  pages 213-222

• Experimental investigation of crack initiation and propagation in high- and gigacycle fatigue in titanium alloys by study of morphology of fracture

  M.V. Bannikov, O. B. Naimark, V.A. Oborin

  pages 51-56

• Crack mode and life of Ti-6Al-4V under multiaxial low cycle fatigue

  Takamoto Itoh, Masao Sakane, Takahiro Morishita, Hiroshi Nakamura, Masahiro Takanashi

• Fatigue crack growth in additive manufactured products

  A. Riemer, H. A. Richard, J.-P. Brüggemann, J.-N. Wesendahl

• Evaluation of near-threshold fatigue crack propagation in Ti-6Al-4V Alloy with harmonic structure created by Mechanical Milling and Spark Plasma Sintering

  S. Kikuchi, T. Imai, H. Kubozono, Y. Nakai, A. Ueno, K. Ameyama

• Crack path for run-out specimens in fatigue tests: is it belonging to high- or very-high-cycle fatigue regime?

  A. Shanyavskiy

• Comparison of two multiaxial fatigue models applied to dental implants

  JM. Ayllon, C Navarro, J. Vázquez, J. Domínguez

  pages 415-426

• Considerations on the choice of experimental parameters in residual stress measurements by hole-drilling and ESPI

  C. Barile, C. Casavola, G. Pappalettera, C. Pappalettere

  pages 211-219

• SCC and Corrosion Fatigue characterization of a Ti-6Al-4V alloy in a corrosive environment – experiments and numerical models

  S. Baragetti, F. Villa

  pages 84-94

• Effects of the manufacturing process on fracture behaviour of cast TiAl intermetallic alloys

  A. Brotzu, F. Felli, D. Pilone

  pages 66-73

• The application of the infrared thermography on titanium alloy for studying fatigue behavior

  P. Hou, J. Fan, Q. Guo, X. Guo

  pages 21-27

• A study of the stored energy in titanium under deformation and failure using infrared data

  A.Yu. Fedorova, M.V. Bannikov, O.A. Plekhov

  Pages 81-88

• Fracture toughness of TiAl-Cr-Nb-Mo alloys produced via centrifugal casting

  A. Brotzu, F. Felli, D. Pilone

  pages 20-25