Repair and retrofitting: modelling and practical application

All Items

• Optimization of the internal structure of 3D-printed components for architectural restoration

  Valentina Tomei, Ernesto Grande, Maura Imbimbo

  227-241

• An interface-based microscopic model for the failure analysis of masonry structures reinforced with timber retrofit solutions

  Fabrizio Greco, Lorenzo Leonetti, Paolo Lonetti, Paolo Nevone Blasi, Arturo Pascuzzo, Giacinto Porco

  210-226

• Enhancing the flexural performance of lightweight concrete slabs with CFRP Sheets: an experimental analysis

  Mustafa Khadim, Abdulkhalik Abdulridha

  181-191

• Methodology to minimize the dynamic response of tall buildings under wind load controlled through semi-active magneto-rheological dampers

  Francisco da Silva Brandão, Alex Koch de Almeida, Letícia Fleck Fadel Miguel

  89-105

• Effectiveness of Partial Wrapping of Stainless-Steel Wire Mesh on Compression Behavior of Concrete Cylinders

  Sunil Raiyani, Paresh Patel, S Suriya Prakash

  71-88

• Civil Structural Health Monitoring and Machine Learning: A Comprehensive Review

  Asraar Anjum, Meftah Hrairi, Abdul Aabid, Norfazrina Yatim, Maisarah Ali

  43-59

• On the stress- and strain-based fatigue behavior of welded thick-walled nodular cast iron

  Christoph Bleicher, Steffen Schoenborn, Heinz Kaufmann, Masoud Alizadeh-Sh

• Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms

  Abdul Aabid Shaikh, Md Abdul Raheman, Meftah Hrairi, Muneer Baig

  310-324

• An investigation of cracks caused by concrete shrinkage and temperature difference in common reinforced concrete bridge structures.

  Van-Hau Nguyen

  242-254

• Retrofitting of Box Section Concrete Beams to Resist Shear and Torsion Using Near-Surface-Mount (NSM) GFRP Stirrups

  Ahmed Mahmoud, Moaz A. Nasser , Tarek S. Mostafa , Ahmed N. Khater

  319-336

• Experimental studies to evaluate tensile and bond strength of Stainless-Steel Wire Mesh (SSWM)

  Paresh Patel, Digesh Joshi, Rinkesh Makawana

  257-269

• Efficiency of shape memory alloy seismic restrainers for several conditions of bridge joints

  Mohamed Hamdy El-Feky, Atef Eraky, Alaa M. Sharabash

  104-120

• Effect of date palm and polypropylene fibers on the characteristics of self-compacting concretes: comparative study

  Dounia Derdour, Mourad Behim, Mohammed Benzerara

  31-50

• Numerical Analysis of Reinforced Concrete Circular Columns Strengthening With CFRP under Concentric and Eccentric Loadings

  Ibrahim Harba , Abdulkhalik Abdulridha, Ahmed AL-Shaar

  190-205

• Numerical nonlinear analysis of RC beans with un-strengthened and CFRP-strengthened opening drilled under service loads within shear zones

  Magdy Khalaf, L. Aboul-Nour, M. Khater, M. Ibrahim

  206-233

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  26-53

• Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially

  Yousria Boulmaali-Hacene Chaouche, Nadia Kouider, Kamel Djeghaba, Bachir Kebaili

  91-106

• Valorization and recycling of packaging belts and post-consumer PET bottles in the manufacture of sand concrete

  Yasmina Biskri, Mohammed Benzerara, Laidi Babouri, Ouided Dehas , Redjem Belouettar

  225-239

• Experimental and numerical investigation of gap K-joints of rectangular hollow section trusses

  Faycal Slimani, Mohammed Benzerara, Messaoud Saidani

  107-125

• Use of combined CZM and XFEM techniques for the patch shape performance analysis on the behavior of a 2024-T3 aluminum structure reinforced with a composite patch

  Kouider Madani, Safaa Chahrazed Djebbar, Nadia Kaddouri, Mohamed El Ajrami, Mohamed Belhouari

  304-325

• Experimental and numerical assessment of the location-based impact of grouting defects on the tensile performance of the fully grouted sleeve connection

  Espoir Kahama, Xie Fuzhe, Chunhua Lu, Isaac Offei

  437-460

• Flexural behavior of delta and bi-delta cold-formed steel beams: experimental investigation and numerical analysis

  Yazid Hadidane, Nadia Kouider, Mohammed Benzerara

  69-88

• Numerical analysis of bonded composite patch efficiency in the case of lateral U and V-notched aluminium panels

  Mohammed A. Bouchelarm, Abdelkader Boulenouar, Meriem Chafi

  62-72

• Web post-buckling strength of thin-webbed cellular beams using carbon PFRP profiles

  Hamda Guedaoura, Yazid Hadidane

  43-61

• Flexural behaviour of reinforced concrete beams strengthened by NSM technique using ECC

  Fady Awad, Mohamed Husain, Khaled Fawzy

  291-309

• Interaction diagram for RC column strengthened by steel angles and strips

  Osman Shallan, Thrwat Sakr, Mahmoud Khater, Ahmed Ismail

  1-12

• Finite element modeling of flexural behavior of reinforced concrete beams externally strengthened with CFRP sheets

  Mahmoud Madqour, Khalid Fawzi, Hilal Hassan

  62-77

• Analysis of static response of RC beams with NSM CFRP/GFRP rods

  Erica Magagnini, Roberto Capozucca, Maria Vittoria Vecchietti

  402-415

• RC beams damaged by cracking and strengthened with NSM CFRP/GFRP rods

  Roberto Capozucca, Erica Magagnini, Maria Vittoria Vecchietti, Samir Khatir

  386-401

• Experimental and analytical investigations of reinforced concrete beams strengthened by different CFRP sheet schemes.

  Mahmoud Madqour, Khaled Fawzy, Hilal Hassan

  123-136

• Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite

  Abdelmalek Regad, Djebara Benzerga, Habib Berrekia, Abdelkader Haddi , Nourredine Chekhar

  115-122

• Fatigue loading characteristic for the composite steel-concrete beams

  Ahmed I.Hassanin, Hesham M. Fawzy, Ahmed I. Elsheikh

  110-118

• Analysis of strengthened short deficient rubberized concrete-filled steel tubular columns

  Fady Elshazly, Suzan Mustafa, Hesham Fawzy

  1-19

• Finite element analysis of the behavior of bonded composite patches repair in aircraft structures

  Islam El-Sagheer, Mai Taimour, Mariam Mobtasem, Amr Abd-Elhady , Hossam El-Din M. Sallam

  128-138

• The Effect of corrosion on the quality repair of the aluminum alloy A 5083 H11 by bonded composites

  Sadek Kaddour, Benaoumeur Aour, Mohammed Salah Bennouna, Abderrahim Talha, Belabbes Bachir Bouiadjra, Morad fari bouanani

  51-65

• Modeling of a cracked and repaired Al 2024T3 aircraft plate: effect of the composite patch shape on the repair performance Effect of the composite patch shape on the repair performance.

  Mohammed Baghdadi, Boualem Serier, Mokadem Salem, Bouchra Zaoui, Khacem Kaddouri

  68-85

• A 3D analysis of crack-front shape of asymmetric repaired aluminum panels with composite patches

  Abdelkader Djebli, El Hadj Besseghier, Mostefa Bendouba, Abdelghani Baltach, Abdelkrim Aid

  547-556

• Stress intensity factors analyses for external semi-elliptical crack for repaired gas-pipeline by composite overwrap under pressure

  Djamel Eddine Belhadri, Mohamed Belhamiani, Wahiba Nesrine Bouzitouna, Wahid Oudad

  599-613

• Pipeline repair by composite patch under temperature and Pressure loading

  Elamine Abdelouahed, H. Benzaama, M. Mokhtari, B. Aour

  690-697

• Analysis of the presence of bonding defects on the fracture behavior of a damaged plate repaired by composite patch

  Nadia Kaddouri, Madani Kouider, Mohammed Bellali Amine, Xavier Feaugas

  331-340

• Analysis of the crack-crack interaction effect initiated in aeronautical structures and repaired by composite patch

  Nour Chafak Ibrahim, Serier Boualem, Mechab Belaïd

  140-149

• Effect of the angles of the cracks of corroded plate in bonded composite repair

  Mokadem Salem, Berrahou Mohamed, Mechab Belaïd, Bachir Bouadjra Belabbes

  113-123

• Optimization of the geometrical parameters of bonded composite wrap for repairing cracked pipelines

  sidi Mohamed Medjdoub Nesreddine, Belabbes Bachir Bouadjra, Miloudi Abdelkader

  102-112

• Influence of hydrothermal ageing on single lap bonded CFRP joints

  Costanzo Bellini, Gianluca Parodo, Wilma Polini, Luca Sorrentino

  173-182

• Influence of limestone dust and natural pozzolan on engineering properties of self-compacting repair mortars

  Mohamed Ghrici, Said Choucha, Mohamed Ghrici, Ahmed Omran

  135-146

• An assessment of composite repair system in offshore platform for corroded circumferential welds in super duplex steel pipe

  Silvio de Barros, Sandip Budhe, Mariana D. Banea, Ney R.F. Rohen, Eduardo M. Sampaio, Valber A. Perrut, Luiz D.M. Lana

  151-160

• Fatigue crack growth of composite patch repaired Al-alloy plates under variable amplitude loading

  Fatima Zohra Seriari, Mustapha Benachour, Mohamed Benguediab

  Pages 43-56

• Structural interventions on the drums of the Parthenon’s north colonnade

  Marilena Mentzini

  Pages 95-107

• Improvement of adhesion performance of mortar-repair interface with inducing crack path into repair

  A. Satoh, K. Yamada, M. Satoh