On the use of length scale parameters to assess the static strength of notched 3D-printed PLA
DOI:
https://doi.org/10.3221/IGF-ESIS.41.34Keywords:
Additive Manufacturing, PLA, Theory of Critical Distances, Static Failure, NotchesAbstract
This paper aims to investigate the accuracy of the Theory of Critical Distances (TCD) in estimating static strength of notched additively manufactured PLA as both notch sharpness and infill angle vary. The TCD takes as its starting point the assumption that the extent of damage under static loading can be assessed successfully by using two different material parameters, i.e. (i) a critical distance whose length is closely related to the material microstructural features and an inherent (i.e., a defect free) material strength. Plain and notched specimens of 3D-printed PLA were manufactured horizontally by making the deposition angle vary in the range 0?-90?. Using the TCD in the form of the Point Method, failures were predicted by directly post-processing the linear-elastic stress fields estimated through the well-known analytical solutions due to Glinka and Newport. Independently of the notch sharpness, the estimates being obtained were found to be highly accurate, falling within an error interval of about 20%. This result fully supports the idea that the TCD can successfully be used in situations of practical interest to design against static loading notched components of additively manufactured PLA by directly post-processing the results from simple linear-elastic Finite Element (FE) models.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.