Comparative study of Shot creep of single-phase titanium alloys in air and neutral gas environment on the test temperature in range from 673 to 1323 K
DOI:
https://doi.org/10.3221/IGF-ESIS.49.21Keywords:
Titanium alloy, Creep, Environment effect, Activation energyAbstract
The paper presents the results of comparative studies of short-term creep in tensile tests of the VT1-0 commercially pure titanium (analogue Grade 2 according to ASTM A485) and the VT5-1 alloy (analogue Grade 6 according to ASTM B265) in air and argon. Tests by the Dorn’s method were carried out in a gas-tight chamber under constant pressure. The specimens were heated by passing alternating current. Empirical coefficients are determined in power dependences of the creep rate and the conventional creep strength on test temperature in the range from 673 to 1323 K for argon and air environment and nominal stress ranging between 4.45 and 9.36 MPa. It is found that heating in argon environment, as compared to heating in air, decreases the rate of short-term creep and increases creep strength at identical nominal stresses in the entire range of test temperatures. Calculations demonstrate that the energy of the activation of short-term creep does not depend on test conditions. This indicates that the deformation mechanism is unchanged.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.