Fatigue crack growth in additive manufactured products
DOI:
https://doi.org/10.3221/IGF-ESIS.34.49Keywords:
Selective Laser MeltingAbstract
Additive Manufacturing (AM) is a new innovative technique that allows the direct fabrication of complex, individual, delicate and high-strength products, based on their 3D data. Selective Laser Melting (SLM) is one of the AM processes that generates metallic components layer by layer using powder-bed technique. The irradiation and consequent melting of metallic powder is realised by the laser source. Employing SLM, especially
complex and individual products, such as implants or aerospace parts, are well suited for economic production
in small batches.
The first important issue in this work was to analyse the fatigue crack growth (FCG) in titanium alloy Ti-6-4 and
stainless steel 316L processed by SLM. As a first step, stress intensity range decreasing tests were performed on
SLM samples in their “as-built” condition. The next step was to adopt measures for optimisation of fatigue
crack growth performance of SLM parts. For this purpose various heat treatments such as stress relief annealing and hot isostatic pressing (HIP) were applied to the CT specimens. Finally, the strong impact of heat treatment on the residual lifetime was demonstrated by numerical fatigue crack growth simulations. For this purpose, the hip joint implant consisting of Ti-6-4 and processed by SLM was taken into account.
It was found that residual stresses have a strong influence on the crack growth in Ti-6-4, while the influence of
the micro-pores on the threshold values remains low. In contrast the results for 316L show that its fracture mechanical behaviour is not affected by residual stresses, whereas the microstructural features lead to
modification in the da/dN-?K-data. The second fundamental aim of this work was to demonstrate the possibilities of the SLM process. For that reason, the individually tailored bicycle crank was optimised regarding its weight and local stresses and finally manufactured using the SLM system. The iterative optimisation procedure was based on static and cyclic loading situations as well as displacements obtained by results from numerical analyses.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.