Alloys: Steels

All Items

• Effects of large amounts of hydrogen on the fatigue crack growth behavior of torsional prestrained carbon steel

  Yuta Matsuda, Hiroshi Nishiguchi, Takayuki Fukuda

  pages 1-10

• Crack initiation characteristics and fatigue property of a high-strength steel in VHCF regime under different stress ratios

  Xiaolong Liu, Chengqi Sun, Youshi Hong

  pages 88-97

• Welding sequence effects on residual stress distribution in offshore wind monopile structures

  Ali Mehmanparast, Oyewole Adedipe, Feargal Brennan, Amir Chahardehi

  pages 125-131

• Experimental estimation of the heat energy dissipated in a volume surrounding the tip of a fatigue crack

  G. Meneghetti, M. Ricotta

  pages 172-181

• Fatigue characterization of a crankshaft steel: Use and interaction of new models

  Sergio Blasón, Cristina Rodríguez, Alfonso Fernández-Canteli

  pages 187-195

• Fretting fatigue crack propagation rate under variable loading conditions

  C. Gandiolle, S. Fouvry

  pages 232-241

• Crack path in liquid metal embrittlement: experiments with steels and modeling

  T. Auger, S. Hémery, M. Bourcier, C. Berdin, M. Martin, I. Robertson

  pages 250-259

• A cohesive zone model to simulate the hydrogen embrittlement effect on a high-strength steel

  G. Gobbi, C. Colombo, L. Vergani

  pages 260-270

• Effect of steel reinforcement with different degree of corrosion on degeneration of mechanical performance of reinforced concrete frame joints

  Wu Xu, Liu Ronggui

  pages 481-491

• Short review: Potential impact of delamination cracks on fracture toughness of structural materials

  X.C. Arnoult, M. Ružicková, K. Kunzová, A. Materna

  pages 509-522

• Biaxial fatigue behavior of a powder metallurgical TRIP steel

  S. Ackermann, T. Lippmann, D. Kulawinski, S. Henkel, H. Biermann

• Effects of microstructure and crystallography on crack path and intrinsic resistance to shear-mode fatigue crack growth

  J. Pokluda, T. Vojtek, A. Hohenwarter, R. Pippan

• Effect of segregations on mechanical properties and crack propagation in spring steel

  B. Žužek, M. Sedlacek, B. Podgornik

• High temperature fatigue tests and crack growth in 40CrMoV13.9 notched components

  P. Gallo, F. Berto

• Influence of vacuum carburizing treatment on fatigue crack growth characteristic in DSG2

  K. Nambu, N. Egami

• Kinetics of fatigue crack growth and crack paths in the old puddled steel after 100-years operating time

  G. Lesiuk, M. Szata

• Effect of inhomogeneous distribution of non-metallic inclusions on crack path deflection in G42CrMo4 steel at different loading rates

  S. Henschel, L. Krüger

• Effect of defect length on rolling contact fatigue crack propagation in high strength steel

  T. Makino, Y. Neishi, D. Shiozawa, Y. Neishi, D. Shiozawa, S. Kikuchi, S. Okada, K. Kajiwara, Y. Nakai

• Role of multiaxial stress state in the hydrogen-assisted rolling-contact fatigue in bearings for wind turbines

  J. Toribio, M. Lorenzo, D. Vergara

  pages 434-443

• Competition between microstructure and defect in multiaxial high cycle fatigue

  F. Morel, R. Guerchais, N. Saintier

  pages 404-414

• Crack tip fields in elastic-plastic and mixed mode I+II+III conditions, finite elements simulations and modeling

  F. Fremy, S. Pommier, E. Galenne, S. Courtin

  pages 397-403

• 2D mapping of plane stress crack-tip fields following an overload

  P. J. Withers, P. Lopez-Crespo, M. Mostafavi, A. Steuwer, J. F. Kelleher, T. Buslaps

  pages 151-158

• Synchrotron 3D characterization of arrested fatigue cracks initiated from small tilted notches in steel

  P. Lorenzino, J.-Y. Buffiere, S. Okazaki, H. Matsunaga, Y. Murakami, H. Matsunaga

  pages 215-220

• Crack tip fields and mixed mode fracture behaviour of progressively drawn pearlitic steel

  J. Toribio, B. González, J.C. Matos

  pages 221-228

• Microstructural study of multiaxial low cycle fatigue

  Masao Sakane, Takamoto Itoh

  pages 319-334

• The influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete

  A. Abrishambaf, V.M.C.F. Cunha, J.A.O. Barros

  pages 38-53

• Inter-laminar shear stress in hybrid CFRP/austenitic steel

  J. Lopes, M. Freitas, D. Stefaniak, P.P. Camanho

  pages 67-79

• Modelling probabilistic fatigue crack propagation rates for a mild structural steel

  J.A.F.O. Correia, A.M.P. de Jesus, A. Fernández-Canteli

  pages 80-96

• Use of Circumferentially Cracked Bar sample for CTOD fracture toughness determination in the upper shelf regime

  D. Gentile, I. Persechino, N. Bonora, G. Iannitti, A. Carlucci

  pages 252-262

• Biaxial fatigue tests and crack paths for AISI 304L stainless steel

  V. Chaves, C. Madrigal, A. Navarro

  pages 273-281

• The specific heat loss combined with the thermoelastic effect for an experimental analysis of the mean stress influence on axial fatigue of stainless steel plain specimens

  G. Meneghetti, M. Ricotta, B. Atzori

  pages 191-200

• Duplex S-N fatigue curves: statistical distribution of the transition fatigue life

  D.S. Paolino, A. Tridello, H.S. Geng, G. Chiandussi, M. Rossetto

  pages 417-423

• Role of the microstructure on the mechanical properties of fully pearlitic eutectoid steels

  J. Toribio, B. González, J.C. Matos, F.J. Ayaso

  pages 424-430

• An investigation on corrosion protection layers in pipelines transporting hydrocarbons

  Gabriella Bolzon, Giovanna Gabetta, Bernardo Molinas

  pages 31-39

• FE analysis of cruciform welded joints considering different mechanical properties for base material, heat affected zone and weld metal

  Pasqualino Corigliano, Vincenzo Crupi, Eugenio Guglielmino, Wolfgang Fricke

  pages 304-310

• Evaluation of the material’s damage in gas turbine rotors by instrumented spherical indentation

  D. Nappini, G. Zonfrillo, F. Mastromatteo, I. Giovannetti

  pages 394-402

• Energy dissipation and storage in iron under plastic deformation (experimental study and numerical simulation)

  A. Kostina, A. Iziumova, O. Plekhov

  pages 28-37

• About the certification of railway rails

  A. De Iorio, M. Grasso, F. Penta, G.P. Pucillo

  Pages 57-68

• High temperature initiation and propagation of cracks in 12%Cr-steel turbine disks

  S. Foletti, A. Lo Conte, S. Salgarollo, F. Bassi, A. Riva

  Pages 123-131

• Plastic zone evolution near a crack tip and its role in environmentally assisted cracking

  Jesús Toribio, Viktor Kharin

  Pages 124-129

• High magnification crack-tip field characterisation under biaxial conditions

  B. Moreno, P. Lopez-Crespo, J. Zapatero

  Pages 145-152

• Study of overload effects in bainitic steel by synchrotron X-ray diffraction

  P. Lopez-Crespo, P.J. Withers, J. R. Yates, A. Steuwer, T. Buslaps, Y. H. Tai

  Pages 153-160

• Relay-race deformation mechanism during uniaxial tension of cylindrical samples of carbon steel: using digital image correlation technique

  T.V. Tretiakova, V.E. Vildeman

  Pages 1-6

• The failure criterion based on hydrogen distribution ahead of the fatigue crack tip

  Yu. G. Matvienko

  Pages 119-126

• Wear surface damage of a Stainless Steel EN 3358 aeronautical component subjected to sliding

  Ferdinando Felli, Andrea Brotzu, Cristian Vendittozzi, Antonio Paolozzi, Francesco Passeggio

  Pages 127-135