Crack tip fields in elastic-plastic and mixed mode I+II+III conditions, finite elements simulations and modeling
DOI:
https://doi.org/10.3221/IGF-ESIS.33.44Keywords:
Mixed modeAbstract
This paper is devoted to the analysis of the load path effect on I+II+III mixed mode fatigue crack propagation in a 316L stainless steel. Experiments were conducted in mode I+II and in mode I+II+III. The same maximum, minimum and mean values of the stress intensity factors were used for each loading path in the experiments. The main result of this set of experiments is that very different crack growth rates and crack paths are observed for load paths that are however considered as equivalent in most fatigue criteria. The experiments conducted in mode I+II and in mode I+II+III, also allowed to show that the addition of mode III loading steps to a mode I+II loading sequence is increasing the fatigue crack growth rate, even when the crack path is not significantly modified.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.