Effect of inhomogeneous distribution of non-metallic inclusions on crack path deflection in G42CrMo4 steel at different loading rates
DOI:
https://doi.org/10.3221/IGF-ESIS.34.35Keywords:
Non-metallic inclusionsAbstract
An inhomogeneous distribution of non-metallic inclusions can result from the steel casting process.
The aim of the present study was to investigate the damaging effect of an inhomogeneous distribution of nonmetallic inclusions on the crack extension behavior. To this end, the fracture toughness behavior in terms of
quasi-static J-?a curves was determined at room temperature. Additionally, dynamic fracture mechanics tests in
an instrumented Charpy impact-testing machine were performed. The fracture surface of fracture mechanics
specimens was analyzed by means of scanning electron microscopy.
It was shown that an inhomogeneous distribution significantly affected the path and, therefore, the plane of
crack growth. Especially clusters of non-metallic inclusions with a size of up to 200 ?m exhibited a very low
crack growth resistance. Due to the damaging effect of the clusters, the growing crack was strongly deflected
towards the cluster. Furthermore, crack tip blunting was completely inhibited when inclusions were located at
the fatigue precrack tip. Due to the large size of the non-metallic inclusion clusters, the height difference
introduced by crack path deflection was significantly larger than the stretch zone height due to the crack tip
blunting. However, the crack path deflection introduced by a cluster was not associated with a toughness
increasing mechanism. The dynamic loading ( 1 0.5 5 s MPam 10 ? ? K? ) did not result in a transition from ductile fracture to brittle fracture. However, the crack growth resistance decreased with increased loading rate. This was attributed to the higher portion of relatively flat regions where the dimples were less distinct.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.