A 3D analysis of crack-front shape of asymmetric repaired aluminum panels with composite patches
DOI:
https://doi.org/10.3221/IGF-ESIS.49.51Keywords:
Patch repair, Stress intensity factor, Aluminum alloy, fatigue, crack frontAbstract
Through this study, a numerical simulation based on 3D in order to investigate the effect of Crack-front shape on the stress intensity factor and fatigue crack growth behavior of center cracked aluminum plate repaired asymmetrically with a bonded composite patch. Consequently, Skew degree is a significant effect on stress intensity factor (SIF) distribution along the crack front in thick panels more than thin panels. Moreover, Fatigue life was calculated using different averages stress intensity factor of patched panel determined from the uniform crack front model and skew crack front model obtained from FEM and when comparing fatigue life values obtained from the finite element model with experimental values were shown a good agreement.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.