Materials mechanical behavior and image analysis

All Items

• Effect of petrographic composition and chemistry of aggregate on the local and general fracture response of cementitious composites

  Michal Vyhlídal, Iva Rozsypalová, Hana Šimonová, Barbara Kucharczyková, Leona Vavro, Martin Vavro, Jiří Němeček, Pavla Rovnaníková, Zbyněk Keršner

  13-29

• Mechanical behaviour of sandy soils embankments treated with cement and reinforced with discrete elements (fibres)

  Yasmine Med Bouteben, Boudaoud Zeineddine

  174-186

• PVC failure modelling through experimental and digital image correlation measurements

  Najat Zekriti, Fatima Majid, Rajae Rhanim, Ibrahim Mrani, Hassan Rhanim

  488-503

• Web post-buckling strength of thin-webbed cellular beams using carbon PFRP profiles

  Hamda Guedaoura, Yazid Hadidane

  43-61

• Microstructure and anisotropic tensile performance of 316L stainless steel manufactured by selective laser melting

  Lin Wang

  380-391

• Impact behaviour of dissimilar AA2024-T351/7075-T651 FSWed butt-joints: effects of Al2O3-SiC particles addition

  Cindy Morales, Mattia Merlin, Annalisa Fortini, Gian Luca Garagnani, Argelia Miranda

  504-515

• Self-healing mortar using different types, content, and concentrations of bacteria to repair cracks.

  Mohamed.A.R. Elmahdy, A.A. ELShami, El-Shikh M. Yousry, Seleem S. E. Ahmad

  486-513

• Analysis of workability, mechanical strength and durability by the FT-IR method of concrete based on silica-limestone sand preserved in aggressive environments

  Hima Abdelkader, Tarek Djedid, Mohammed Mani, Abdelhamid Guettala

  566-579

• Cracking Patterns of Brittle Hemispherical Domes: an Experimental Study

  Siwen Cao, Andras A. Sipos

  265-310

• Reinforced Soft Soil by CSV with/without Polypropylene fibres: Experimental and Numerical analysis.

  Anouar Souadeuk, Zeineddine Boudaoud

  374-395

• Study on Micro - Nano Sized Al2O3 Particles on Mechanical, Wear and Fracture Behavior of Al7075 Metal Matrix Composites

  M. Ravikumar, H. N. Reddappa, R. Suresh, E. R. Babu, C. R. Nagaraja

  166-178

• Experimental study of the Portevin-Le Chatelier effect under complex loading of Al-Mg alloy: procedure issues

  Tatyana Viсtorovna Tretyakova, Mikhail Tretyakov, Evgeniia Chechulina

  434-441

• Influence of 3d-printing parameters on the mechanical properties of 17-4PH stainless steel produced through Selective Laser Melting

  Francesca Romana Andreacola, Ilaria Capasso, Letizia Pilotti, Giuseppe Brando

  282-295

• Sensitivity analysis of the GTN damage parameters at different temperature for dynamic fracture propagation in X70 pipeline steel using neural network

  Abdelmoumin Ouladbrahim, Idir Belaidi , Samir Khatir , Erica Magagnini, Roberto Capozucca , Magd Abdel Wahab

  442-452

• The effect of using polypropylene fibers on the durability and fire resistance of concrete

  Hassan Suiffi, Anas El Maliki, Fatima Majid, Omar Cherkaoui

  296-307

• Inverse problems with the digital image correlation: approach and applications

  Emanuele Sgambitterra, Fabrizio Niccoli

  300-320

• Reliability assessment of the behavior of reinforced and/or prestressed concrete beams sections in shear failure

  Karim Benyahi, Mohand Said Kachi, Youcef Bouafia, Salma Barboura, Jia Li

  195-222

• Optimization of High-Performance-Concrete properties containing fine recycled aggregates using mixture design modeling

  Tounsia Boudina, Dalila Benamara, Rebih Zaitri

  50-62

• Evaluation of the survivability of CFRP honeycomb-cored panels in compression after impact tests

  Oleg Staroverov, Elena Strungar, Valery Wildemann

  1-15

• Study of the Influence of Alloying Elements on the Mechanical Characteristics and Wear Behavior of a Ductile Cast Iron

  Iliasse Boulifa, Ali Hadji

  74-83

• Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite

  Abdelmalek Regad, Djebara Benzerga, Habib Berrekia, Abdelkader Haddi , Nourredine Chekhar

  115-122

• Exploitation of static and dynamic methods for the analysis of the mechanical nanoproperties of polymethylmetacrylate by indentation

  Soufiane Benaissa, Samir Habibi, Djameleddine Semsoum, Hassen Merzouk, Abdelnou Mezough, Bénali Boutabout, Alex Montagne

  46-55

• Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite Bimatallic components for lightweight design

  Paolo Ferro, Alberto Fabrizi, Franco Bonollo, Filippo Berto

  289-301

• Thermal Emission analysis to predict damage in specimens of High Strength Concrete

  Filippo Cucinotta, Antonino D'Aveni, Eugenio Guglielmino, Antonino Risitano, Giacomo Risitano, Dario Santonocito

  258-270

• Mechanical performance of intelligent asphalt mixture utilizing rejuvenator encapsulated method

  Sari Sharif Ali, Mahyar Arabani, Hassan Latifi

  187-197

• Biochar-based cement pastes and mortars with enhanced mechanical properties

  Alice Sirico, Patrizia Bernardi, Beatrice Belletti, Alessio Malcevschi, Luciana Restuccia, Giuseppe Andrea Ferro, Daniel Suarez-Riera

  297-316

• Mathematical data processing according to digital image correlation method for polymer composites

  Dmitriy Lobanov, Elena Strungar

  56-65

• Mechanical behavior of materials with a compact hexagonal structure obtained by an advanced identification strategy of HCP material, AZ31B-H24

  Rym Harbaoui, Olfa Daghfas, Amna Znaidi, Victor Tuninetti

  295-305

• Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging

  Andrew Gryguc, Sugrib Kumar Shaha, Seyed Behzad Behravesh, Hamid Jahed, Mary Wells, Bruce Williams

  152-165

• Thermal Effect on Bond Strength of Rubberized Concrete Filled Steel Tubular Sections

  Hesham Fawzy, Suzan Mustafa, Ahmed AbdEl-Badie

  353-371

• Inelastic deformation and destruction of fiber-laminated polymer composites in stress concentration zones

  Elena Strungar, Valery Wildemann

  406-416

• Effect of aggregate type on moisture susceptibility of modified cold recycled mix asphalt: evaluation by mechanical tests and Surface Free Energy method

  Hassan Latifi, Nahid Amini

  211-229

• Restoring stone monuments: Enlightening critical details by the combined use of innovative sensing techniques

  Ermioni Pasiou

  560-572

• Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA

  Carlos Vicente, João Fernandes, Augusto Deus, Maria Vaz, Marco Leite, Luis Reis

  748-756

• Classification of ductile cast iron specimens: a machine learning approach

  Alberto De Santis, Daniela Iacoviello, Vittorio Di Cocco, Francesco Iacoviello

  Pages 231-238

• Defect detection of wire rope for oil well based on adaptive angle

  Zhang Jijun, Meng Xiangqing

• A research on detecting and recognizing bridge cracks in complex underwater conditions

  Wang Tao, Du Tao, Zou Xiaohong, Sun Yiming

  pages 537-544

• Graphite nodules features identifications and damaging micromechanims in ductile irons

  Alberto De Santis, Daniela Iacoviello, Vittorio Di Cocco, Francesco Iacoviello

  Pages 12-21