Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA
DOI:
https://doi.org/10.3221/IGF-ESIS.48.68Keywords:
3D printing, PLA, water absorption, mechanical properties, printing parametersAbstract
This work aims to study the influence of protective coatings on the water absorption and mechanical properties of 3D printed poly–lactic acid (PLA) parts. The PLA parts were fabricated with different levels of the 3D printing process parameters, aiming to define samples with distinct strength and ductility/toughness characteristics. Water absorption tests following the standard ASTM D570–98 were performed on uncoated and coated PLA specimens. The effectiveness of two protective coatings based on acrylic and polyurethane varnish on reducing water absorption was evaluated. Both protective coatings have shown being effective on preventing water absorption by the PLA, with polyurethane presenting the best performance reducing water absorption by 38%. Tensile tests were carried out to determine the ultimate tensile strength, elastic modulus, yield tensile strength, fracture strain and toughness of specimens, before and after the application of protective coatings. The polyurethane protective coating also benefits the tensile properties of PLA parts, increasing the strength and ductility/toughness characteristics of specimens up to 24%.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.