Structural Integrity

All Items

• Effect of cracking and randomness of inputs on corrosion initiation of reinforced concrete bridge decks exposed to chlorides

  P. Konecny, P. Lehner

  Pages 29-37

• Comparison of behaviour of laterally loaded round and squared timber bolted joints

  Antonín Lokaj, Kristýna Klajmonová

  Pages 56-61

• Experiment and numerical modeling suspended ceiling with identification of working diagram material

  J. Flodr, O. Sucharda, D. Mikolasek

  Pages 62-71

• Experimental analysis on physical and mechanical properties of thermal shock damage of granite

  He Xiao, Li Qing, Chen Hongkai, Tang Hongmei, Wang Linfeng

  Pages 181-190

• Numerical study of eddy current by Finite Element Method for cracks detection in structures

  S. Harzallah, M. Chabaat, K. Chabane

  Pages 282-290

• Mechanical behaviour and durability of high volume fly ash cementitious composites

  Usman Haider, Zdenek Bittnar, Lubomír Kopecky, Petr Bittnar, Jiri Nemecek, Asif Ali, Jaroslav Pokorny

  Paes 305-318

• A numerical study on the structural integrity of self-anchored cable-stayed suspension bridges

  Paolo Lonetti, Arturo Pascuzzo

  Pages 358-376

• A plastic stress intensity factor approach to turbine disk structural integrity assessment

  V. Shlyannikov, A. Zakharov, R. Yarullin

  193-199

• An effect of heat insulation parameters on thermal losses of water-cooled roofs for secondary steelmaking electric arc furnaces

  E. Mihailov, P. Popgeorgiev, M. Ivanova

  297-304

• Analysis of time-dependent reliability of degenerated reinforced concrete structure

  Zhang Hongping, Zhang Lili, Xia Zhengbing

  352-359

• Integrity and life estimation of turbine runner cover in a hydro power plant

  A. Sedmak, S. Bosnjak, M. Arsic, S.A. Sedmak, Z. Savic

  Pages 63-68

• Methodological developments in the field of structural integrity analyses of large scale reactor pressure vessels in Hungary

  Tamás Fekete

  PAges 78-98

• Review of pressurized thermal shock studies of large scale reactor pressure vessels in Hungary

  Tamás Fekete

  Pages 99-111

• Effects of hydrogen induced delay fracture on high-strength steel plate of automobile and the improvement

  Fengzhu Liu, Yu Zhao

  Pages 139-150

• Welding sequence effects on residual stress distribution in offshore wind monopile structures

  Ali Mehmanparast, Oyewole Adedipe, Feargal Brennan, Amir Chahardehi

  pages 125-131

• Implementation of a damage model in a finite element program for computation of structures under dynamic loading

  Nasserdine Oudni, Youcef Bouafia

  pages 278-284

• Paths of interactive cracks in creep conditions

  K. Nowak

• Robust design of a polygonal shaft-hub coupling

  R. Citarella, M. Perrella

• Study of drilling muds on the anti-erosion property of a fluidic amplifier in directional drilling

  Jiang-fu He, Peng-yu Zhang, Qi-lei Yin, Kun Yin, Hou-ping Liu

• Thermal stress analysis of different full and ventilated disc brakes

  C. Baron Saiz, T. Ingrassia, V. Nigrelli, V. Ricotta

• Static and modal numerical analyses for the roof structure of a railway freight refrigerated car

  Raffaele Sepe, Angela Pozzi

  pages 451-462

• Design of a novel magnetorheological damper with internal pressure control

  Nicola Golinelli, Andrea Spaggiari

  pages 13-23

• Assessment of structural integrity of subsea wellhead system: analytical and numerical study

  A.R. Maligno, R. Citarella, V.V. Silberschmidt, C. Soutis

  pages 97-119

• Field Load Acquisition and variable amplitude fatigue testing on maxi-scooter motorcycles

  N. Petrone, M. Saraceni

  pages 226-236

• Evaluation of safe bearing capacity of soil foundation by using numerical analysis method

  Abdoullah Namdar, Xiong Feng

  pages 138-144

• Thermal degradation in Carrara marbles as the cause of deformation of cladding slabs

  A. Spagnoli, M. Migliazza, M. Zucali, A.M. Ferrero

  pages 145-152

• Dynamic additional loads influencing the fatigue life of gears in an electric vehicle transmission

  G. Belingardi, V. Cuffaro, F. Curà

  pages 469-477

• Transverse strength of railway tracks: part 1. Planning and experimental setup

  Antonio De Iorio, Marzio Grasso, Francesco Penta, Giovanni Pio Pucillo, Paolo Pinto, Stefano Rossi, Mario Testa, Giuseppe Farneti

  pages 478-485

• Effect of nonlinearity of restrainer and supports on the elasto-plastic seismic response of continuous girder bridge

  Wang Changfeng, Zhu Long, Chen Xingchong

  pages 486-494

• Degradation assessment of waterlogged wood at Haimenkou site

  Gao Jingran, Li Jian, Qiu Jian, Guo Menglin

  pages 495-501

• Research on parameters optimization of bilateral ring gear blank-holder in thick-plate fine blanking

  C.J. Su, X.H. Dong, S.M. Guo, Q. L.Li, T.T. Li

  pages 502-514

• Time-history simulation of civil architecture earthquake disaster relief- based on the three-dimensional dynamic finite element method

  Liu Bing, Qi Yaoguang, Du Jiyun

  pages 526-536

• A research on detecting and recognizing bridge cracks in complex underwater conditions

  Wang Tao, Du Tao, Zou Xiaohong, Sun Yiming

  pages 537-544

• An analysis research of the stiffness characteristics of hospital building materials

  Chen Yunyu

  pages 545-551

• Transverse strength of railway tracks: part 2. Test system for ballast resistance in line measurement

  Antonio De Iorio, Marzio Grasso, Francesco Penta, Giovanni Pio Pucillo, Vincenzo Rosiello

  pages 578-592

• Transverse strength of railway tracks: part 3. Multiple scenarios test field

  Antonio De Iorio, Francesco Penta, Giovanni Pio Pucillo, Vincenzo Rosiello, Stefano Lisi, Stefano Rossi, Mario Testa

  pages 593-601

• Role of the microstructure on the mechanical properties of fully pearlitic eutectoid steels

  J. Toribio, B. González, J.C. Matos, F.J. Ayaso

  pages 424-430

• Integrated assessment procedure for determining the fracture strength of glass components in CSP systems

  L. Guerra Rosa, J. Cruz Fernandes, B. Li

  pages 438-445

• Fracture-Safe and Fatigue-Reliable Structures

  M. N. James

  pages 293-303

• Use of FBG sensors for monitoring cracks of the equestrian statue of Bartolomeo Colleoni in Venice

  F. Felli, A. Brotzu, D. Pilone, C. Vendittozzi

  pages 48-54

• Cf/C composites: correlation between CVI process parameters and Pyrolytic Carbon microstructure

  F. Burgio, P. Fabbri, G. Magnani, M. Scafè, L. Pilloni, A. Brentari, A. Brillante, T. Salzillo

  pages 68-74

• Determining fracture energy parameters of concrete from the modified compact tension test

  A. Fernández-Canteli, L. Castañón, B. Nieto, M. Lozano, T. Holušová, S. Seitl

  pages 383-393

• An efficient Bouc & Wen approach for seismic analysis of masonry tower

  Luca Facchini, Michele Betti

  pages 139-149

• CH of masonry materials via meshless meso-modeling

  Giuseppe Giambanco, Emma La Malfa Ribolla, Antonino Spada

  pages 150-165

• Damage propagation in a masonry arch subjected to slow cyclic and dynamic loadings

  J. Toti, V. Gattulli, Elio Sacco

  pages 166-177

• A 3D mixed frame element with multi-axial coupling for thin-walled structures with damage

  D. Addessi, P. Di Re

  pages 178-195

• Limit analysis on FRP-strengthened RC members

  D. De Domenico, A.A. Pisano, P. Fuschi

  pages 209-221

• The strong formulation finite element method: stability and accuracy

  Francesco Tornabene, Nicholas Fantuzzi, Michele Bacciocchi

  pages 251-265

• A simple beam model to analyse the durability of adhesively bonded tile floorings in presence of shrinkage

  S. de Miranda, A. Palermo, F. Ubertini

  pages 293-301

• Crack detection in beam-like structures by nonlinear harmonic identification

  Paolo Casini, Fabrizio Vestroni, Oliviero Giannini

  pages 313-324