Composites

All Items

• Effect of the angles of the cracks of corroded plate in bonded composite repair

  Mokadem Salem, Berrahou Mohamed, Mechab Belaïd, Bachir Bouadjra Belabbes

  113-123

• Analysis of the crack-crack interaction effect initiated in aeronautical structures and repaired by composite patch

  Nour Chafak Ibrahim, Serier Boualem, Mechab Belaïd

  140-149

• A progessive damage fatigue model for unidirectional laminated composites based on finite element analysis theory and practice

  Michael Hack, D. Carrella-Payan, B. Magneville, T. Naito, Y. Urushiyama, W. Yamazaki, T. Yokozeki, W. Van Paepegem

  54-61

• Graphene Oxide on the Microstructure and Mechanical Properties of Cement Based Composite Material

  Jinchang Pang, Wang Yeming

  156-163

• Influence of limestone dust and natural pozzolan on engineering properties of self-compacting repair mortars

  Mohamed Ghrici, Said Choucha, Mohamed Ghrici, Ahmed Omran

  135-146

• Experimental characterization and numerical modelling analyses of nano-adhesive-bonded joints

  Fayssal Hadjez, Brahim Necib

  94-105

• The Effects of Shear on Mode II Delamination A Critical Review

  Paolo Sebastiano Valvo

  123-139

• Experimental characterization of interlaminar fracture toughness of composite laminates assembled with three different carbon fiber lamina

  Domenico Gentile

  Pages 155-170

• Experimental study on uniaxial tensile and compressive behavior of high toughness cementitious composite

  ShiYong Jiang, Shuai Tao, Wei Fei, XueYang Li

  Pages 33-42

• Fatigue crack growth of composite patch repaired Al-alloy plates under variable amplitude loading

  Fatima Zohra Seriari, Mustapha Benachour, Mohamed Benguediab

  Pages 43-56

• Crack growth of explosive welding zirconium-steel bimetal subjected to cyclic bending

  D. Rozumek, Z. Marciniak

  Pages 40-45

• Crack onset assessment near the sharp material inclusion tip by means of modified maximum tangential stress criterion

  Ondrej Krepl, Jan Klusák

  Pages 66-73

• Pilot evaluation of a fracture process zone in a modified compact tension specimen by X-ray tomography

  Jiri Klon, Stanislav Seitl, Hana Simonova, Zbynek Kersner, Ivana Kumpova, Daniel Vavrik

  Pages 161-169

• Fracture toughness and failure mechanism of high performance concrete incorporating carbon nanotubes

  Anwar Khitab, Sajjad Ahmad, Rao Arsalan Khushnood, Syed Ali Rizwan, Giuseppe Andrea Ferro, Luciana Restuccia, Mustajab Ali, Imran Mehmood

  Pages 238-248

• Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement-based composites

  H. Simonova, M. Vyhlidal, B. Kucharczykova, P. Bayer, Z. Kersner, L. Malikova, J. Klusak

  Pages 211-219

• Dependence of mechanical characteristics from composition and structure and optimization of mechanical fracture energy of polymer composite material based on high-molecular rubbers

  E. Nurullaev, A. S. Ermilov, N. Yu. Lyubimova

  Pages 369-377

• Carbon nano-tubes in improving the mechanical property of cement-based composite materials

  Xu Wu, Li Dai

  Pages 388-395

• Fracture toughness investigations of Al6061-Graphite particulate composite using compact specimens

  Saleemsab Doddamani, Mohamed Kaleemulla

  Pages 484-490

• Nonlinear analysis of reinforced and composite columns in fire

  Jaroslav Navrátil, Jaromír Kabelá?

  Pages 72-87

• Parametric characterization of a mesomechanic kinematic caused by ondulation in fabric reinforced composites: analytical and numerical investigations

  Marco Romano, Ingo Ehrlich, Norbert Gebbeken

  Pages 226-247

• Modelling of fracture processes in laminate composite plates with embedded delamination

  Mikhail A. Tashkinov

  Pages 248-262

• Experimental investigation on fracture toughness of Al6061–graphite by using Circumferential Notched Tensile Specimens

  Saleemsab Doddamani, Mohamed Kaleemulla

  Pages 274-281

• The effect of ply folds as manufacturing defect on the fatigue life of CFRP materials

  S. Hörrmann, A. Adumitroaie, M. Schagerl

  Pages 76-81

• Implementation of fatigue model for unidirectional laminate based on finite element analysis: theory and practice

  D. Carrella-Payan, B. Magneville, M. Hack, C. Lequesne, T. Naito, Y. Urushiyama, W. Yamazaki, T. Yokozeki, W. Van Paepegem

  Pages 184-190

• Mechanical behaviour and durability of high volume fly ash cementitious composites

  Usman Haider, Zdenek Bittnar, Lubomír Kopecky, Petr Bittnar, Jiri Nemecek, Asif Ali, Jaroslav Pokorny

  Paes 305-318

• Novel magnetic composites based on water soluble unsaturated polyester resin and iron oxide nanoparticles

  Petar Velev, Rayna Bryaskova

  272-279

• Experimental investigation of effect of specimen thickness on fracture toughness of Al-TiC composites

  M. S. Raviraj, C. M. Sharanaprabhu, G. C. Mohankumar

  360-368

• Improvement of performance of ultra-high performance concrete based composite material added with nano materials

  Pang Jinchang, Liu Ronggui

  Pages 130-138

• A numerical study of two different specimen fixtures for the modified compact tension test – their influence on concrete fracture parameters

  T. Holušová, H. Cifuentes, A. Fernández-Canteli, S Seit

  pages 242-249

• Crack path and fracture surface modifications in cement composites

  Sajjad Ahmad, Jean Marc Tulliani, Giuseppe Andrea Ferro, Rao Arsalan Khushnood, Luciana Restuccia, Pravin Jagdale

• Modified fracture properties of cement composites with nano/micro carbonized bagasse fibers

  Rao Arsalan Khushnood, Sajjad Ahmad, Giuseppe Andrea Ferro, Luciana Restuccia, Jean Marc Tulliani, Pravin Jagdale

• Effect of fibre arrangement on the multiaxial fatigue of fibrous composites: a micromechanical computational model

  Roberto Brighenti, Andrea Carpinteri, Daniela Scorza

• Static and dynamic experimental study of strengthened inforced short concrete corbel by using carbon fabrics, crack path in shear zone

  I. Ivanova, J. Assih

• Analytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint

  M. Ševcík, P. Hutar, A. P. Vassilopoulos, M. Shahverdi

• Investigation of crack paths in natural fibre-reinforced composites

  S. Keck, M. Fulland

• A new micromechanical model of CNT-metal nanocomposites with random clustered distribution of CNTs

  Chongyang Gao, Yu Lu, Y.T. Zhu

  pages 471-484

• Inter-laminar shear stress in hybrid CFRP/austenitic steel

  J. Lopes, M. Freitas, D. Stefaniak, P.P. Camanho

  pages 67-79

• Dependence of the mechanical fracture energy of the polymeric composite material from the mixture of filler fractions

  E. M. Nurullaev, A. S. Ermilov

  pages 120-126

• Impact response of balsa core sandwiches

  Nurdane Mortas, Paulo N.B. Reis, José A.M. Ferreira

  pages 403-408

• Electrical resistivity and ultrasonic measurements during sequential fracture test of cementitious composite

  V. Veselý, P. Kone?ný, P. Lehner, D. Pieszka, L. Žídek

  pages 263-272

• Interlaminar fracture in woven carbon/epoxy laminates

  Paulo N.B. Reis, José A.M. Ferreira, José D.M. Costa, António M. Pereira

  pages 431-438

• Cf/C composites: correlation between CVI process parameters and Pyrolytic Carbon microstructure

  F. Burgio, P. Fabbri, G. Magnani, M. Scafè, L. Pilloni, A. Brentari, A. Brillante, T. Salzillo

  pages 68-74

• Improvements in self-consolidating cementitious composites by using micro carbonized aggregates

  Giuseppe Andrea Ferro, Sajjad Ahmad, Rao Arsalan Khushnood, Luciana Restuccia, Jean Marc Tulliani

  pages 75-83

• micromechanical approach for the micropolar modeling of heterogeneous periodic media

  M.L. De Bellis, D. Addessi

  pages 37-48

• Influence of boundary conditions on the response of multilayered plates with cohesive interfaces and delaminations using a homogenized approach

  R. Massabò

  pages 230-240

• A finite-element approach for the analysis of pin-bearing failure of composite laminates

  Michele Marino, Francesca Nerilli, Giuseppe Vairo

  pages 241-250

• Estimate of compressive strength of an unidirectional composite lamina using cross-ply and angle-ply laminates

  M. Scafè, G. Raiteri, A. Brentari, R. Dlacic, E. Troiani, M. P. Falaschetti, E. Besseghini

  pages 399-409

• Mechanical characterization of basalt woven fabric composites: numerical and experimental investigation

  Piergiorgio Valentino, Emanuele Sgambitterra, Franco Furgiuele, Marco Romano, Ingo Ehrlich, Norbert Gebbeken

  pages 1-11

• A review of thermographic techniques for damage investigation in composites

  Laura Vergani, Chiara Colombo, Flavia Libonati

  pages 1-12

• Research of the effectiveness of mechanical testing methods with analysis of features of destructions and temperature effects

  A.V. Babushkin, D.S. Lobanov, A.V. Kozlova, I.D. Morev

  Pages 89-95