Fracture toughness investigations of Al6061-Graphite particulate composite using compact specimens
DOI:
https://doi.org/10.3221/IGF-ESIS.41.60Keywords:
Fracture toughness, Al6061-Graphite Composites, Compact Tension specimensAbstract
The objective of this research work is to study the fracture behavior of Al6061 with graphite particulate composite produced by the stir casting technique. For the study different composition of the particulate metal matrix composite used is Al6061 with 3, 6, 9, & 12% of graphite particles. Compact Tension (CT) specimens were utilized to determine fracture toughness for different compositions of Al6061-graphite particulate metal matrix composite. Specimens with different composition will be prepared for different crack length to width (a/w) ratios according to the ASTM E-399 standard testing procedure. The maximum fracture toughness was found for Al6061-9%Gr for a/w =0.45 and the value is 16.74 MPa ?m.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.