Nondestructive Examination

All Items

• Damage evolution law on the surface field of argillaceous dolomite based on Brazilian test and 3D digital image correlation

  Xiaochuan Wang, Delei Yang

  144-151

• A novel algorithm for crack path identification based on infrared images

  Luca Romanin, Alexei Vinogradov, Filippo Berto, Paolo Ferro

  116-124

• Experimental characterization of fiber-reinforced cementitious mortar under tension

  Patrizia Bernardi, Roberto Cerioni, Daniele Ferretti, Filippo Leurini, Elena Michelini

  97-104

• Analysis of dissipated energy and temperature fields at severe notches of AISI 304L stainless steel specimens

  Daniele Rigon, Mauro Ricotta, Giovanni Meneghetti

  334-347

• Mechanical and fracture properties of particleboard

  Liviu Marsavina, Ion Octavian POP, Emanoil LINUL

  266-276

• Development of a piezoelectric energy-harvesting sensor: from concept to reality

  Konstantinos Gkoumas, Franco Bontempi, Prof.

  150-160

• Deformation and failure of carbon fiber composite specimens with embedded defects during tension-torsion test

  Tatyana Viсtorovna Tretyakova, Valery E. Wildemann, Elena M. Strungar, Mikhail P. Tretyakov

  295-305

• Experimental study on concrete damage location by Computerized tomography and Acoustic Emission technology

  Jinghong Liu, Jian Xie, Yongjian Liu, Panfei Shi

  352-360

• Numerical simulation of a heat generation in a layered material during ultrasonic wave propagation

  Anastasiia Kostina, Oleg Plekhov, Sergey Aizikovich

  332-342

• Investigation of the effect of cracks on the vibration processes in reinforced concrete structures

  Igor Shardakov, Aleksey Shestakov, Roman Tsvetkov, Irina Glot

  383-390

• Considerations over the Italian road bridge infrastructure safety after the Polcevera viaduct collapse: past errors and future perspectives

  Fabio Bazzucchi, Luciana Restuccia, Giuseppe Ferro

  400-421

• Management of multi-source information to identify the typology of the horizontal structures in historical masonry buildings: the case study of the Museum of Capodimonte in Naples (Italy)

  Alessandra Maione, Luca Umberto Argiento, Claudia Casapulla, Andrea Prota

  240-251

• Pre-failure indicators detected by Acoustic Emission: Alfas stone, cement-mortar and cement-paste specimens under 3-point bending

  Stavros K. Kourkoulis, Ioanna Dakanali

  Pages 74-84

• Eddy current modelling using multi-layer perceptron neural networks for detecting surface cracks

  Salaheddine Harzallah, R. Rebhi, M. Chabaat, A. Rabehi

  147-155

• The effect of porosity on fragmentation statistics of dynamically loaded ZrO2 ceramics

  Marina Davydova, Sergei Uvarov, Oleg Naimark

  Pages 106-112

• Regularities of mechanical behavior of steel 40Cr during the postcritical deformation of specimens in condition of necking effect at tension

  M.P. Tretyakov, T.V. Tretyakova, V.E. Wildemann

  Pages 146-154

• A numerical and experimental study through laser thermography for defect detection on metal additive manufactured parts

  N. Montinaro, D. Cerniglia, G. Pitarresi

  Pages 231-240

• Pilot evaluation of a fracture process zone in a modified compact tension specimen by X-ray tomography

  Jiri Klon, Stanislav Seitl, Hana Simonova, Zbynek Kersner, Ivana Kumpova, Daniel Vavrik

  Pages 161-169

• Influence the loading conditions and the stress concentrators on the spatial-time inhomogeneity due to the yield delay and the jerky flow: study by using the digital image correlation and the infrared analysis

  Tatyana V. Tretyakova, Valery E. Wildemann

  Pages 303-314

• Failure analysis of thin metal foils

  G. Bolzon, M. Shahmardani, R. Liu, E. Zappa

  Pages 328-336

• Experimental methodology for the quantification of crack tip plastic zone and shape from the analysis of displacement fields

  J.M. Vasco-Olmo, F.A. Diaz, M.N. James, C.J. Christopher, E.A. Patterson

  Pages 166-174

• Measurement and analysis of fatigue crack deformation at the micro-scale

  D. Nowell, K.I. Dragnevski, S.J. O’Connor

  Pages 197-202

• On DIC measurements of DeltaKeff to verify if it is the FCG driving force

  Julián Andrés Ortiz González, Jaime Tupiassú Pinho de Castro, Giancarlo Luis Gomez Gonzáles, Marco Antonio Meggiolaro, José Luiz de França Freire

  Pages 227-235

• Stress Intensity Factor calculation from displacement fields

  S. Beretta, L. Patriarca, S. Rabbolini

  Pages 269-276

• Study of strain localizations in a polycrystalline medium in presence of a quasi-static crack

  L. Patriarca, P.G. Luccarelli, S. Foletti

  Pages 277-284

• Variable mode-mixity during fatigue cycles – crack tip parameters determined from displacement fields measured by digital image correlation

  Michael Vormwald, Yigiter Hos, José L.F. Freire, Giancarlo L.G. Gonzáles, Jorge G. Díaz

  Pages 314-322

• Williams expansion-based approximation of the stress field in an Al 2024 body with a crack from optical measurements

  S. Seitl, L. Malíkova, J. Sobek, P. Frantík, P. Lopez-Crespo

  Pages 323-331

• Acoustic Emissions versus Pressure Stimulated Currents during bending of restored marble epistyles: Preliminary results

  Stavros K. Kourkoulis, Ioanna Dakanali, Ermioni D. Pasiou, Ilias Stavrakas, Dimos Triantis

  Pages 536-551

• Regularities of fracture pattern formation in alumina ceramics subjected to dynamic indentation

  E. Tolmacheva (Lyapunova), M. Davydova, V. Chudinov, S. Uvarov, O. Naimark, D. Zaytsev, P. Panfilov

  Pages 552-561

• Using acoustic emissions to enhance fracture toughness calculations for CCNBD marble specimens

  K. Kaklis, S. Mavrigiannakis, V. Saltas, F. Vallianatos, Z. Agioutantis

  Pages 1-17

• Acoustic emissions and pressure stimulated currents experimental techniques used to verify Kaiser effect during compression tests of Dionysos marble

  Ilias Stavrakas

  Pages 32-40

• Correlation between the electric and acoustic signals emitted during compression of brittle materials

  Ermioni D. Pasiou, Dimos Triantis

  Pages 41-51

• Acoustic emissions and electric signal recordings, when cement mortar beams are subjected to three-point bending under various loading protocols

  A. Kyriazopoulos

  Pages 52-60

• Strain monitoring of cement-based materials with embedded polyvinyl alcohol - carbon nanotube (PVA-CNT) fibers

  Zoi S. Metaxa, Wilfrid Neri, Philippe Poulin, Nikolaos D. Alexopoulos

  Pages 61-73

• A thermography-based method for fatigue behavior evaluation of coupling beam damper

  Zhe Zhang, Jinping Ou, Dongsheng Li, Shuaifang Zhang, Junling Fan

  Pages 149-161

• Experimental analysis on physical and mechanical properties of thermal shock damage of granite

  He Xiao, Li Qing, Chen Hongkai, Tang Hongmei, Wang Linfeng

  Pages 181-190

• Fatigue assessment by energy approach during tensile tests on AISI 304 steel

  A. Risitano, D. Corallo, E. Guglielmino, G. Risitano, L. Scappaticci

  Pages 201-215

• Numerical study of eddy current by Finite Element Method for cracks detection in structures

  S. Harzallah, M. Chabaat, K. Chabane

  Pages 282-290

• Multi-purpose fatigue sensor. Part 1. Uniaxial and multiaxial fatigue

  M.V. Karuskevich, S.R. Ignatovich, ?.P. Maslak, A. Menou, P.?. Maruschak, S.V. Panin, F. Berto

  Pages 198-204

• Multi-purpose fatigue sensor. Part 2. Physical backgrounds for damages accumulation and parameters of their assessment

  M.V. Karuskevich, S.R. Ignatovich, T.P. Maslak, A. Menou, P.?. Maruschak, S.V. Panin, F. Berto

  Pages 205-214

• Averaged strain energy density-based synthesis of crack initiation life in notched steel bars under torsional fatigue

  Filippo Berto, Alberto Campagnolo, Giovanni Meneghetti, Keisuke Tanaka

  Pages 215-223

• Structural mechanisms of formation of adiabatic shear bands

  Mikhail Sokovikov, Dmitry Bilalov, Vladimir Oborin, Vasiliy Chudinov, Sergey Uvarov, Yuriy Bayandin, Oleg Naimark

  Pages 296-304

• Failure analysis of dissimilar single-lap joints

  F.A. Stuparu, D.A. Apostol, D.M. Constantinescu, M. Sandu, S. Sorohan

  Pages 69-77

• Numerical simulation of dynamic brittle fracture of pipeline steel subjected to DWTT using XFEM-based cohesive segment technique

  Reza H. Talemi

  Pages 151-159

• Acoustic emission characteristics of instability process of a rock plate under concentrated loading

  S.R. Wang, C.Y. Li, Z.S. Zou, X.L. Liu

  Pages 182-190

• Relation between the plastic instability and fracture of tensile tested Cu-Sn alloys investigated with the application of acoustic emission technique

  W. Ozgowicz, B. Grzegorczyk, A. Pawelek, W. Wajda, W. Skuza, A. Piatkowski, Z. Ranachowski

  pages 11-20

• Mechanisms of plastic instability and fracture of compressed and tensile tested Mg-Li alloys investigated using the acoustic emission method

  A. Pawelek, A. Piatkowski, W. Wajda, W. Skuza, A. Tarasek, W. Ozgowicz, B Grzegorczyk, Z. Ranachowski, S. Kúdela Jr, S. Kúdela

  pages 21-30

• New experimental techniques for fracture testing of highly deformable materials

  E. Dall’Asta, V. Ghizzardi, R. Brighenti, E. Romeo, R. Roncella, A. Spagnoli

  pages 161-171

• Fatigue properties and fracture mechanism of load carrying type fillet joints with one-sided welding

  Takamasa Abe, Hiroyuki Akebono, Masahiko Kato, Atsushi Sugeta

  pages 196-205

• Combined lock-in thermography and heat flow measurements for analysing heat dissipation during fatigue crack propagation

  J. Baer, A. Vshivkov, O. Plekhov