Damage mechanics

All Items

• Mesoscale investigation of mass concrete temperature control systems and their consequences on concrete mechanical behaviour.

  Mohammed Matallah, Abdelsemi Taibi, T.T. Chimoto, F.K. Maradzika

  416-437

• Structural and seismic vulnerability assessment of the Santa Maria Assunta Cathedral in Catanzaro (Italy): classical and advanced approaches for the analysis of local and global failure mechanisms

  Fabrizio Greco, Daniele Gaetano, Lorenzo Leonetti, Paolo Lonetti, Arturo Pascuzzo, Aurora Skrame

  464-487

• Numerical analysis of the elastic-plastic behavior of a tubular structure in FGM under pressure and defect presence

  Kouider Madani, A. Houari, A.S. Bouchikhi, M. Mokhtari

  212-231

• Effect of the Stress State on the Adhesive Strength of an Epoxy-Bonded Assembly

  Sergey Smirnov, Dmitry Konovalov, Irina Veretennikova, Aleksander Pestov, Viktoria Osipova

  311-325

• Residual Force Method for damage identification in a laminated composite plate with different boundary conditions

  Amar Behtani, Samir Tiachacht, Tawfiq Khatir, Samir Khatir, Magd Abdel Wahab, Brahim Benaissa

  35-48

• Cracking Patterns of Brittle Hemispherical Domes: an Experimental Study

  Siwen Cao, Andras A. Sipos

  265-310

• Mode I stress intensity factor with various crack types

  Ehab Samir Mohamed Mohamed Soliman

  471-485

• Ductile fracture modeling of metallic materials: a short review

  Riccardo Fincato, Seiichiro Tsutsumi

  1-17

• Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method

  Sviatoslav Eleonsky, Yuri Matvienko , Vladimir Pisarev, Michael Zajtsev

  115-128

• Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation

  Daniele Rigon, Filippo Berto, Giovanni Meneghetti

  525-536

• Long-term degradation, damage and fracture in deep rock tunnels: A review on the effect of excavation methods

  Wadslin Frenelus, Hui Peng, Jingyu Zhang

  128-150

• Numerical prediction of the ductile damage for axial cracks in pipe under internal pressure

  Amina Ismahène Fezazi, Belaïd Mechab, Salem Mokadem, Boualem Serier

  231-241

• A new methodology to predict damage tolerance based on compliance via global-local analysis

  Gilberto Gomes, Thiago Oliveira, Alvaro Martins

  211-230

• Periodic homogenization and damage evolution in RVE composite material with inclusion

  Karim Benyahi, Youcef Bouafia, Mohand Said Kachi, Sarah Benakli, Amel Hamri

  319-343

• Damage severity for cracked simply supported beams

  Ehab Samir Mohamed Mohamed Soliman

  151-165

• Damage identification in steel plate using FRF and inverse analysis

  Samir Khatir , Magd Abdel Wahab , Samir Tiachacht, Cuong Le Thanh , Roberto Capozucca, Erica Magagnini, Brahim Benaissa

  416-433

• Sensitivity analysis of the GTN damage parameters at different temperature for dynamic fracture propagation in X70 pipeline steel using neural network

  Abdelmoumin Ouladbrahim, Idir Belaidi , Samir Khatir , Erica Magagnini, Roberto Capozucca , Magd Abdel Wahab

  442-452

• Lumped damage mechanics as a diagnosis tool of reinforced concrete structures in service: case studies of a former bridge arch and a balcony slab

  Rafael Cunha, Camila Vieira, David Amorim

  21-32

• Evaluation of the behaviour of reinforced concrete beams repaired with glass fibre reinforced polymer (GFRP) using a damage variable

  Rafael Cunha, Kevin Oliveira, Antônio Brito, Camila Vieira, David Amorim

  82-92

• Experimental and numerical optimization study of shock wave damping in aluminum panel sandwich

  Masoud Rahmani, Amin Moslemi Petrudi

  88-109

• Mechanical performance of intelligent asphalt mixture utilizing rejuvenator encapsulated method

  Sari Sharif Ali, Mahyar Arabani, Hassan Latifi

  187-197

• Modeling of CFRP strengthened RC beams using the SNSM technique, proposed as an alternative to NSM and EBR techniques

  Adel Boulebd, Ferhoune Noureddine, Boukhezar Mohcene, Habib Abdelhak Mesbah

  21-35

• Investigation of the effect of impact load on concrete-filled steel tube columns under fire

  Ali Golsoorat Pahlaviani, Ali Mohammad Rousta, Peyman Beiranvand

  317-324

• Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging

  Andrew Gryguc, Sugrib Kumar Shaha, Seyed Behzad Behravesh, Hamid Jahed, Mary Wells, Bruce Williams

  152-165

• Experimental and analytical investigation on the coupled elastoplastic damage model of coal-rock The investigation on damage model of coal-rock

  Yundong Shou, Jianwei Zhang, Filippo Berto

  434-445

• A coupled elastoplastic damage model for brittle rocks elastoplastic damage model for brittle rocks

  Zheng Li, Yundong Shou, Deping Guo, Filippo Berto

  446-456

• Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction

  Andrey Tumanov, V.N. Shlyannikov, A.P. Zakharov

  299-309

• Microstructural damage evaluation of ferritic-ausferritic spheroidal graphite cast iron

  Diego Omar Fernandino, Vittorio Di Cocco, Nicolas Tenaglia, Costanzo Bellini, Francesco Iacoviello, Roberto Enrique Boeri

  477-485

• Fracture precursor phenomena in marble specimens under uniaxial compression by means of Acoustic Emission data

  Dimos Triantis, Stavros Kourkoulis

  537-547

• Damage evolution in marble under uniaxial compression monitored by Pressure Stimulated Currents and Acoustic Emissions

  Ilias Stavrakas, Stavros Kourkoulis, Dimos Triantis

  573-583

• A SEM-X-Ray assisted experimental approach for the determination of mechanical and thermal load – induced damage in MMCs

  Victor Kytopoulos, Emilios Sideridis, John Venetis, Chrysoula Riga, Alexandros Altzoumailis

  414-422

• Using a Hashin Criteria to predict the Damage of composite notched plate under traction and torsion behavior

  Fouzia Larbi Chaht, Mohamed Mokhtari, Habib Benzaama

  331-341

• Characterization of stress-strain state in gas turbine engine compressor disc taking into account damage accumulation

  Natalia V Boychenko, Ivan Ishtyryakov

  54-67

• Algorithms for calculation damage processes

  Aleksandr Dmitrievich Nikitin, Nikolay G. Burago, Ilia S. Nikitin, Boris A. Stratula

  212-224

• Coupled identification of the hardening behavior laws and Gurson–Tvergaard–Needleman damage parameters - Validation on tear test of 12NiCr6 CT specimen

  Mohamed Hadj Miloud, Ibrahim Zidane, Mohammed Mendas

  630-642

• Damage evolution in the AlMg6 alloy during high and very high cycle fatigue

  Mikhail Bannikov, Dmitry Bilalov, Vladimir Oborin, Oleg Naimark

  383-395

• Damage identification in beams using additional rove mass and wavelet transform

  Erwin U. Lopez Palechor, Luciano M. Bezerra, Marcus Vinicius G. de Morais, Ramon S. Y. R. C. Silva, Edenia N. Barros

  614-629

• Rock Brittleness Evaluation Method Based on the Complete Stress-Strain Curve

  ChenYang Liu, Yong Wang, XiaoPei Zhang, LiZhi Du

  557-567

• Damage detection in a reinforced concrete bridge applying wavelet transform in experimental and numerical data

  ramon saleno yure rubim costa silva, Erwin U. L. Palechor, Luciano M. Bezerra, Marcus V. G. de Morais, Welington V. da Silva

  693-705

• In-plane anisotropy in deformation micro-mechanism of commercially pure titanium during monotonic tension and cyclic loading

  Atasi Ghosh

  585-598

• Localized wrinkling of metal films on elastic and liquid substrates

  Yi Sun, Liping Yan, Benyong Chen, Wei Song, Filippo Berto

  648-665

• Damage evaluation under complex fatigue loading conditions

  Luis Reis, Joao Caxias, Henrique Soares, Pedro R. Costa, Vitor Anes, Manuel Freitas

  318-331

• Damage localization of closing cracks using a signal decomposition technique

  J. Prawin, Rama Mohan Rao A

  513-522

• Ductile damage evolution law for proportional and non-proportional loading conditions

  Riccardo Fincato, Seiichiro Tsutsumi, Hideto Momii

  231-246

• The thermal damaging process of diorite under microwave irradiation

  Xirui Lu, Chen Yuan, Zeng Junsen, Hu Qijun, Shao Dadong, Zhang Haibin, Lu Xirui

  65-73

• Micro failure analysis of adhesively bonded joints enhanced with natural cork particles: Impact of overlap length and particles volume fraction

  Alireza Akhavan-Safar, Ana Queirós Barbosa, Lucas Filipe Martins da Silva, Majid Reza Ayatollahi

  266-274

• Numerical simulation of self-piercing riveting process (SRP) using continuum damage mechanics modelling

  Nicola Bonora, Gabriel Testa, Gianluca Iannitti, Andrew Ruggiero, Domenico Gentile

  161-172

• Modification of the Bonora Damage Model for shear failure

  Nicola Bonora, Gabriel Testa, Andrew Ruggiero, Gianluca Iannitti, Domenico Gentile

  140-150

• The effect of loading rate on fracture energy of asphalt mixture at intermediate temperatures and under different loading modes

  M.R.M. Aliha, M. Fakhri, E. Haghighat Kharrazi, F. Berto

  Pages 113-132

• Continuum damage modeling through theoretical and experimental pressure limit formulas

  Fatima Majid, Mohamed Elghorba

  Pages 79-89