Effect of composition and heat treatment on the mechanical properties of Fe Mn Al steels
DOI:
https://doi.org/10.3221/IGF-ESIS.62.43Keywords:
Aging treatment, FeMnAl steels, Low density steels, Mechanical propertiesAbstract
Starting from the research aimed at the development of substitute alloys for stainless steels, with the aim of replacing strategic metals such as chromium and nickel with the more available manganese, FeMnAlC alloys have been studied and developed for several years. These alloys exhibit an attractive strength/ductility combination, low density, and some of them show good oxidation behaviour at high temperatures. After a preliminary study, in this paper the effect of a solubilization treatment followed by aging in the temperature range 550 - 750 °C has been evaluated. The results of the investigation revealed that the steel characterized by the higher amount of Mn and Al shows, after heat treatment, the formation of phases that make the alloy very brittle. Considering the obtained results, it is evident that optimizing the alloy chemical composition is of paramount importance to guarantee a high fracture toughness if the steel works for limited time intervals at high temperature.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2022 Avishek Mondal, Daniela Pilone, Andrea Brotzu, Ferdinando Felli
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.
How to Cite
