Alloys: Al alloys

All Items

• Experimental and numerical study on mechanical properties of aluminum alloy under uniaxial tensile test

  O. Daghfas, A. Znaidi, A. Ben Mohamed, R. Nasri

  Pages 263-273

• Fatigue crack growth of aluminium alloy 7075-T651 under non-proportional mixed mode I and II loads

  Xiaobo Yu, Ling Li, Gwenaelle Proust

  Pages 148-154

• Atomistic modeling of different loading paths in single crystal copper and aluminum

  R. Pezer, I. Trapic

  Pages 191-197

• Structural mechanisms of formation of adiabatic shear bands

  Mikhail Sokovikov, Dmitry Bilalov, Vladimir Oborin, Vasiliy Chudinov, Sergey Uvarov, Yuriy Bayandin, Oleg Naimark

  Pages 296-304

• Multiaxial fatigue of in-service aluminium longerons for helicopter rotor-blades

  A. Shanyavskiy, A. Toushentsov

  22-27

• Analysis of initial crack path in fretting fatigue

  J. Vazquez, S. Astorga, C. Navarro, J. Dominguez

  38-45

• Ultrasonic fatigue testing device under biaxial bending

  C. Brugger, T. Palin-Luc, P. Osmond, M. Blanc

  46-51

• Interaction of shear and normal stresses in multiaxial fatigue damage analysis

  Nicholas R. Gates, Ali Fatemi

  160-165

• Fatigue crack growth behavior under multiaxial variable amplitude loading

  Nicholas R. Gates, Ali Fatemi, Nagaraja Iyyer, Nam Phan

  166-172

• Multiaxial fatigue of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) for automotive safety components under constant and variable amplitude loading

  C.M. Sonsino, R. Franz

  200-206

• Designing aluminium friction stir welded joints against multiaxial fatigue

  L. Susmel, D. G. Hattingh, M. N. James, E. Maggiolini, R. Tovo

  207-214

• Experimental investigation of hardness of FSW and TIG joints of Aluminium alloys of AA7075 and AA6061

  Chetan Patil, Hemant Patil, Hiralal Patil

  325-332

• Scaling of compression strength in disordered solids: metallic foams

  J. Ková?ik, J. Jerz, N. Mináriková, L. Marsavina, E. Linul

  Pages 55-62

• Crack initiation and propagation paths in small diameter FSW 6082-T6 aluminium tubes under fatigue loading

  Roberto Tovo, Luca Susmel, M. Neil James, Danie G. Hattingh, Enrico Maggiolini

  Pages 119-129

• Multiple crack propagation by DBEM in a riveted butt-joint: a simplified bidimensional approach

  R. Citarella

  Pages 160-167

• Mechanism of crack branching in the fatigue crack growth path of 2324-T39 Aluminium alloy

  Lu Songsong, Bao Rui, Zhang Ting, Fei Binjun

  pages 73-81

• Controlling fatigue crack paths for crack surface marking and growth investigations

  S. Barter, P. White, M. Burchill

  pages 132-141

• Multiaxial fatigue crack path prediction using critical plane concept

  Jafar Albinmousa

  pages 182-186

• Influence of joint line remnant on crack paths under static and fatigue loadings in friction stir welded Al-Mg-Sc alloy

  Y. Besel, M. Besel, U. Alfaro Mercado, T. Kakiuchi, Y. Uematsu

  pages 295-305

• Fatigue crack growth prediction in 2xxx AA with friction stir weld HAZ properties

  A. Tzamtzis, A. T. Kermanidis

  pages 396-404

• Crack initiation and early propagation plane orientation of 2A12-T4 aluminum alloy under tension-torsion fatigue loading including mean tensile stress

  Shi Xinhong, Zhang Jianyu, Xiao Qingshan, Liu Tianqi

  pages 441-448

• Fatigue cracking of aluminium alloy AlZn6Mg0.8Zr subjected to thermomechanical treatment

  A. Kowalski, W. Ozgowicz, M. Kurek, A. Kurek, T. Lagoda

  pages 449-455

• Crack growth behavior of aluminum alloy 6061 T651 under uniaxial and biaxial planar testing condition

  S. Henkel, E. Liebelt, H. Biermann, S. Ackermann

• Fatigue crack paths and properties in A356-T6 aluminum alloy microstructurally modified by friction stir processing under different conditions

  A. Tajiri, Y. Uematsu, T. Kakiuchi, Y. Suzuki

• Influence of control parameters on the crack paths in the aluminum alloy 2024 under bending

  E. Marcisz, D. Rozumek, Z. Marciniak

• Multiscale study of fracture in aluminum-magnesium alloy under fatigue and dynamic loading

  Vladimir Oborin, Mikhail Bannikov, Oleg Naimark, Mikhail Sokovikov, Dmitry Bilalov

• Estimation of fretting fatigue life using a multiaxial stress-based critical distance methodology

  F. C. Castro, J. A. Araújo, M. S. T. Pires, L. Susmel

  pages 444-450

• Equivalent configurations for notch and fretting fatigue

  J. A. Araújo, F. C. Castro, S. Pommier, J. Bellecave, J. Mériaux

  pages 427-433

• Multiaxial fatigue of aluminium friction stir welded joints: preliminary results

  D. G. Hattingh, M. N. James, L. Susmel, R. Tovo

  pages 382-389

• Spherical particles formation under biaxial cyclic loading due to mesotunneling effect

  A. Shanyavskiy

  pages8-16

• Surface crack growth in cylindrical hollow specimen subject to tension and torsion

  V. Shlyannikov, R. Yarullin, I. Ishtyryakov

  pages 335-344

• Failure of cargo aileron’s actuator

  G. Zucca, M. Amura, L. Allegrucci, M. Bernabei

  pages 409-416

• The effect of steady torsion on fatigue crack growth under rotating bending loading on aluminium alloy 7075-T6

  M. da Fonte, L. Reis, M. de Freitas

  pages 360-368

• Application of Digital Image Correlation (DIC) in resonance machines for measuring fatigue crack growth

  P. Lorenzino, G. Beretta, A. Navarro

  pages 369-374

• Study of spatial-time inhomogeneity of serrated plastic flow Al-Mg alloy: using DIC-technique

  T. V. Tretyakova, V. E. Wildemann

  pages 83-97

• Investigation via morphological analysis of aluminium foams produced by replication casting

  A. Boschetto, L. Bottini, F. Campana, L. Consorti, D. Pilone

  01

• Crack of a helicopter main rotor actuator attachment: failure analysis and lessons learned

  L. Allegrucci, F. De Paolis, A. Coletta, M. Bernabei

  Pages 104-122

• Initiation and growth behavior of very-long microstructurally short fatigue cracks

  P. Lorenzino, A. Navarro

  Pages 138-144

• Effect of weld parameter on mechanical and metallurgical properties of dissimilar joints AA6082–AA6061 in T6 condition produced by FSW

  H. S. Patil, S. N. Soman

  Pages 151-160