Fracture micrographic analysis of a carbon FML under three-point bending load
DOI:
https://doi.org/10.3221/IGF-ESIS.61.27Keywords:
Fibre metal laminates, fracture features, flexural behaviourAbstract
The core of the present work concerns the analysis of the failure mode and the fracture process induced by the flexural load in Fibre Metal Laminates (FMLs). The influence of the connection layer placed between the composite ones and the metal sheets on the fracture mode was analysed. The considered FML was made of aluminium sheets interposed with carbon fibre reinforced polymer (CFRP) layers, joined with two different types of interface: by using a structural adhesive, or by relying on the bonding capacity of the prepreg resin. Then, the mechanical performances of the produced laminates were determined through the three-point bending test procedure, and the support span was varied to investigate different loading conditions. Finally, the fracture surface morphology was analysed by using both optical and scanning electron microscopes. The type of interface was found to influence the strength of the studied FML, and different fracture modes were observed, depending on the loading condition.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2022 Costanzo Bellini, Vittorio Di Cocco, Francesco Iacoviello, Larisa Patricia Mocanu
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.
How to Cite
