Limit load based evaluation of plastic η factor for C(T) specimen with a mismatched weld
DOI:
https://doi.org/10.3221/IGF-ESIS.48.50Keywords:
Limit Load, Eta, strength mismatchAbstract
Plastic η factor is adopted to account crack tip plasticity while evaluating the fracture toughness of the materials as per ASTM E1820. It is valid only for homogeneous materials. The plastic η factor for compact tension geometry (CT) with type 316LN stainless steel weld has been evaluated based on elastic-plastic FE analysis. The incremental elastic-plastic material model with various values for strength mismatch level (M), from 1.2 to 2.2 has been considered for the weld. The weld width (h) parallel to the crack plane is varied from 4 mm to 16 mm. The η values thus obtained are analyzed and the inferences are discussed.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.
How to Cite
