Crack tip field in circumferentially-cracked round bar (CCRB) in tension affected by loss of axial symmetry

Authors

  • J. Toribio
  • B. González
  • J.C. Matos

DOI:

https://doi.org/10.3221/IGF-ESIS.41.19

Keywords:

Stress intensity factor, Finite element method, J-integral, Circumferentially-cracked round bar, Eccentricity of circular ligament

Abstract

In this paper, the stress intensity factor (SIF) is computed in a circumferentially-cracked round bar (CCRB) subjected to tensile loading, considering that the resistant ligament is circular and exhibits certain eccentricity in relation to the cylinder axis. The computation was performed by means of the finite element method (FEM) using a three dimensional (3D) model and the J-integral, the analyzed variable being the eccentricity of the circular ligament. Results show that the SIF is higher at the deepest point of the crack and that an increase of eccentricity (in relation to the bar axis) raises the difference between the SIF values along the crack front. From a certain value of the misalignment a bending effect appears, so that the crack remains closed in the area near the point of lower depth.

Downloads

Download data is not yet available.

Downloads

Published

28-06-2017

How to Cite

Crack tip field in circumferentially-cracked round bar (CCRB) in tension affected by loss of axial symmetry. (2017). Frattura Ed Integrità Strutturale, 11(41), Pages 139-142. https://doi.org/10.3221/IGF-ESIS.41.19