Investigation of very high cycle fatigue by thermographyc method
DOI:
https://doi.org/10.3221/IGF-ESIS.30.68Keywords:
Thermographic methodAbstract
Nowadays, many components and structures are subjected to fatigue loading with a number of cycles higher
than 107. In this scientific work, the behaviour of two kinds of tool steel was investigated in very high cycle fatigue regime. The fatigue tests were carried out at the frequency of 20 kHz and in fully reversed tensioncompression mode (R = -1) by means of an ultrasonic fatigue testing equipment. The radiometric surface temperature was detected during all the test by means of an IR camera in order to extend the Thermographic Method and the Energetic Approach in very high cycle fatigue regime. The failure mechanism of the investigated steels was evaluated by means of several experimental techniques (scanning electron microscopy, Energy Dispersive X-ray spectroscopy and Optical Microscopy).
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.
How to Cite
