Fracture toughness and fatigue resistance of quenched and tempered steels with microstructures deriving from a slant quench. Consequences on technical standards
DOI:
https://doi.org/10.3221/IGF-ESIS.18.06Abstract
Mechanical components fabbricated with quenched and tempered steels, exhibiting mixed microstructures as derived from slant quench conditions, are frequently encountered in the industrial practice, owing to a tendency to employ quite low alloy steels or due to quite large sections. The low notch strength of mixed microstructure steel samples was already emphasized in the 1950s; yet, it has never been investigated again. Also, technical standards have not addressed the risk deriving from the use of steel components with mixed microstructures. When pearlite and ferrite are present alongside tempered martensite and bainite, the fracture toughness of steel pieces diminishes to very dangerous levels. Results of an experimental program on the fracture toughness of plastic mould steels are reported, singling out microstructure mixtures with too a low toughness. In addition, the fatigue crack propagation rate is adversely affected by inhomogeneous metallographic structures. It is inferred that experimental results and ensuing considerations should be taken into account when formulating technical norms.Downloads
Downloads
Issue
Section
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.