Use of a gray level co-occurrence matrix to characterize duplex stainless steel phases microstructure
DOI:
https://doi.org/10.3221/IGF-ESIS.16.05Abstract
Duplex stainless steels are widely used in industry. This is due to their higher strength compared to austenitic steels and to their higher toughness than ferritic steels. They also have good weldability and high resistance to stress corrosion cracking. These steels are characterized by two-phase microstructures composed by almost the same level of ferrite and austenite. Duplex steel 2205 samples evaluated are: as received, cold rolled (33%) and heat-treated at 800°C for 10 hours. A metallographic etching with 10% oxalic acid has been carried out to highlight the phases morphology. Some photos have been taken by SEM microscope and submitted to image analysis. The analysis carried out is based on the determination of co-occurrence matrix and on the following interpretation of appropriate indicators. Through these indicators is possible to estimate the features of images objectively.Downloads
Downloads
Issue
Section
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.