Vol. 14 No. 53 (2020): July 2020

The browsable issue is available at this link

Dear friends,
due to the Covid-19, many scientific associations recently discovered the web.
Considering that, for example:
YouTube was born in 2005
YouTube became in 2007 an independent subsidiary of Google Inc.
I am proud to remember that:
IGF videorecords all its events since 2007 and all the videos are available in the IGF YouTube channel.
IGF streamed on the FB page its first event in 2017 (IGF24 in Urbino).
IGF organized its first virtual conference in 2019 (VCSI1).
IGF is online since 2007.
IGF website: https://www.gruppofrattura.eu/
IGF FB page (since January 2009): https://www.facebook.com/GruppoItalianoFrattura
IGF YouTube channel: https://www.youtube.com/c/IGFTube
Frattura ed Integrità Strutturale (since 2007): https://www.fracturae.com/index.php/fis/index
Frattura ed Integrità Strutturale Visual Abstracts YouTube Channel: https://www.youtube.com/c/VisualAbstractsFIS

Please, do not hesitate to send us your suggestions to further improve our journal. Very best,

Published: 19-07-2020

Advanced Manufacturing and Processing

Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints

Paulo NB Reis, Ana Amaro, Altino Loureiro

124-133
- Visual Abstract
Experimental Analysis of the Physical Degradation of Polymers – The Case of Polymethyl Methacrylate

Afaf Kaddouri, Boualem Serier, Khacem Kaddouri, Mohamed Belhouari

66-80
- Visual Abstract
Understanding powder bed fusion additive manufacturing phenomena via numerical simulation

Paolo Ferro, Filippo Berto, Luca Romanin

252-284
- Visual Abstract
Uniformity of thickness of metal sheets by patchwork blanks: potential of adhesive bonding

Gianluca Parodo, Gillo Giuliano, Luca Sorrentino

166-176
- Visual Abstract
Mechanical behavior of materials with a compact hexagonal structure obtained by an advanced identification strategy of HCP material, AZ31B-H24

Rym Harbaoui, Olfa Daghfas, Amna Znaidi, Victor Tuninetti

295-305
- Visual Abstract
A new approach of CMT seam welding deformation forecasting based on GA-BPNN

Yao Lu, Yanfeng Xing, Xuexing Li, Sha Xu

325-336
- Visual Abstract

Analytical, Numerical and Physical Models

Comparative study of the repair of cracked plates with two different composite patches

Moulgada Abdelmadjid, Zagane Mohammed El Sallah, Sahli Abderahmane, Ait kaci Djafar, Zahi Rachid

187-201
- Visual Abstract
Forecasting bearing capacity of the mixed soil using artificial neural networking

Abdoullah Namdar

285-294
- Visual Abstract
Finite element analysis of the interface defect in ceramic-metal assemblies: Alumina-Silver

Bouafia Farida, Lamia Hadid, Boualem Serier, Sardar Sikandar Hayat

1-12
- Visual Abstract
An analytical beam model for the evaluation of crack tip root rotations and displacements in orthotropic specimens

Ilaria Monetto, Roberta Massabò

372-393
- Visual Abstract
An Applicability of Vyalov’s equations to ice wall strength estimation

Anastasiya Kostina, Maxim Zelnin, Oleg Plekhov, Ivan Panteleev, Lev Levin, Michail Semin

394-405
- Visual Abstract
Modeling of mechanical behavior of cork in compression

Younès Saadallah

417-425
- Visual Abstract
Experimental and analytical investigation on the coupled elastoplastic damage model of coal-rock The investigation on damage model of coal-rock

Yundong Shou, Jianwei Zhang, Filippo Berto

434-445
- Visual Abstract
A coupled elastoplastic damage model for brittle rocks elastoplastic damage model for brittle rocks

Zheng Li, Yundong Shou, Deping Guo, Filippo Berto

446-456
- Visual Abstract

Fatigue

Low cycle fatigue damage model and sensitivity analysis of fatigue crack initiation by finite element approach

Zhiqiang Wang, Xiaoguang Huang, Dian-hao Zhang

81-91
- Visual Abstract
Physical Parameters of Polymer Composite Materials Created on the Basis of Low and High Molecular Weight Rubbers

E. Nurullaev, N. Y. Lyubimova, T. A. Gertsen

134-140
- Visual Abstract
Fatigue Life Simulation and Analysis of Aluminum Alloy Sheet Self-piercing Riveting

Qingchun Zheng, Naixin Wang, Peihao Zhu, Jingna Liu, Wenpeng Ma

141-151
- Visual Abstract
Fatigue Analysis of Bitumen Modified with Composite of Nano-SiO2 and Styrene Butadiene Styrene Polymer

Sajad Rezaei, Seyed Mohsen Damadi, Ali Edrisi, Mansour Fakhri, Mohammad Worya Khordehbinan

202-209
- Visual Abstract
Evaluating Properties of Asphalt Mixtures Containing polymers of Styrene Butadiene Rubber (SBR) and recycled Polyethylene Terephthalate (rPET) against Failures Caused by Rutting, Moisture and Fatigue

Mahmoud Ameri, Reza Mohammadi, Milad Mousavinezhad, Amirhossein Ameri, Hamid Shaker, Arash Fasihpour

177-186
- Visual Abstract

Fracture

Plastic stress intensity factor behavior at small and large scale yielding

Alexander Zakharov, Valery Shlyannikov, Anastasia Tartygasheva

223-235
- Visual Abstract
Stress intensity factors for mixed-mode crack growth in imitation models under biaxial loading

Rustam Yarullin, V.N. Shlyannikov, I.S. Ishtyriakov, M.M. Yakovlev

210-222
- Visual Abstract
Inelastic deformation and destruction of fiber-laminated polymer composites in stress concentration zones

Elena Strungar, Valery Wildemann

406-416
- Visual Abstract
Glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode(I/II) load using FPB specimen

Abilash Desai, C. M. Sharanaprabhu, S. K. Kudari

426-433
- Visual Abstract

Impact & Dynamics

Shear behaviour of reinforced concrete beams under impact loads by the lumped damage framework

Mateus Oliveira, Daniel Teles, David Amorim

13-25
- Visual Abstract

Structural Integrity and Durability of Structures

Longitudinal fracture analysis of inhomogeneous beams with continuously varying sizes of the cross-section along the beam length

Victor Rizov, Holm Altenbach

38-50
- Visual Abstract
The Effect of corrosion on the quality repair of the aluminum alloy A 5083 H11 by bonded composites

Sadek Kaddour, Benaoumeur Aour, Mohammed Salah Bennouna, Abderrahim Talha, Belabbes Bachir Bouiadjra, Morad fari bouanani

51-65
- Visual Abstract
Monitoring and analysis of reinforced concrete plate-column structure under room temperature and fire based on acoustic emission

Dongye Wang, Yuli Dong, Dashan Zhang, Weihua Wang, Xin Lu

236-251
- Visual Abstract
Code development for the computational analysis of crack propagation in structures

Antonios Chatzigeorgiou, Efstathios Theotokoglou, George I. Tsamasphyros

306-324
- Visual Abstract
Risk based analysis of RHPP penstock structural integrity

Snežana Kirin, Lazar Jeremić, Aleksandar Sedmak, Igor Martić, Simon Sedmak, Ivana Vučetić, Tamara Golubović

345-352
- Visual Abstract
Thermal Effect on Bond Strength of Rubberized Concrete Filled Steel Tubular Sections

Hesham Fawzy, Suzan Mustafa, Ahmed AbdEl-Badie

353-371
- Visual Abstract

SI: Structural Integrity and Safety: Experimental and Numerical Perspectives

Numerical Investigation of the Seismic Behavior of Unanchored Steel Tanks with an emphasis on the Uplift Phenomenon

Jalal Akbari, Omid Salami, Mohsen Isari

92-105
- Visual Abstract
Effect of different parameters controlling the flexural behavior of RC beams strengthened with NSM using nonlinear finite element analysis

Ramy Mostafa Reda, Zeinab Omar, Hossam Sallam, Seleem S. E. Ahmad

106-123
- Visual Abstract
Numerical and Experimental Analysis of Stacking Sequences Effects in Composite Mechanical Joints under Impact Loadings

Pourya Fathi, Alireza Naddaf Oskouei, Khodadad Vahedi, Amin Moslemi Petrudi

457-473
- Visual Abstract

SI: Additive Manufacturing

Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy

Carlos Navarro Pintado, Jesús Vázquez, Jaime Domínguez, Antonio Periñán, Marta Herrera García, Fernando Lasagni, Simon Bernarding, Sebastian Slawik, Frank Mücklich, Francisco Boby, Lloyd Hackel

337-344
- Visual Abstract