Estimation of the nonlinear dependence of the indications of a fiber Bragg grating on temperature and strain from experimental data

Authors

  • Aleksey Shestakov Institute of Continuous Media Mechanics, Ural Branch, Russian Academy of Science, 1, Korolev street, Perm, Russia https://orcid.org/0000-0003-3387-7442
  • Igor Shardakov Institute of Continuous Media Mechanics, Ural Branch, Russian Academy of Science, 1, Korolev street, Perm, Russia https://orcid.org/0000-0001-8673-642X
  • Irina Glot Institute of Continuous Media Mechanics, Ural Branch, Russian Academy of Science, 1, Korolev street, Perm, Russia https://orcid.org/0000-0001-8673-642X
  • Valery Yepin Institute of Continuous Media Mechanics, Ural Branch, Russian Academy of Science, 1, Korolev street, Perm, Russia
  • Georgiy Gusev Institute of Continuous Media Mechanics, Ural Branch, Russian Academy of Science, 1, Korolev street, Perm, Russia https://orcid.org/0000-0002-9072-0030
  • Roman Tsvetkov Institute of Continuous Media Mechanics, Ural Branch, Russian Academy of Science, 1, Korolev street, Perm, Russia

DOI:

https://doi.org/10.3221/IGF-ESIS.62.38

Keywords:

Fiber Bragg grating, Calibration, Temperature compensation, Quadratic approximation

Abstract

The readings of the Bragg grating are determined based on the optical radiation reflected from it. A quantitative characteristic of this radiation is the wavelength at which the maximum power of the optical signal is achieved. This characteristic is called the central wavelength of the grating. The central wavelength shift depends on temperature and strain. As a rule, a linear approximation of this dependence is used. However, from the available literature it is known that, the grating wavelength shift demonstrates a strong nonlinear dependence on temperature at 5<T<200K and a weak quadratic dependence close to room temperature. Thus far, the authors have not found studies that consider all terms in the quadratic expansion of the central wavelength of the Bragg grating as a function of temperature and strain at near-room temperatures. Our work is intended to fill this gap. The article describes an experiment in which an optical fiber with Bragg grating was subjected to loading using three different weights. A step-wise temperature change from 5 to 100 0С was realized for each weight. Based on these data, all terms of the quadratic expansion of the desired function are determined. The contribution of each term is estimated.

Downloads

Download data is not yet available.

Published

22-09-2022

Issue

Section

SI: Russian mechanics contributions for Structural Integrity

Categories

How to Cite

Estimation of the nonlinear dependence of the indications of a fiber Bragg grating on temperature and strain from experimental data. (2022). Frattura Ed Integrità Strutturale, 16(62), 561-572. https://doi.org/10.3221/IGF-ESIS.62.38