Influence of contact parameters in fretting-fatigue contact 3D problems

Fella Hamadouche; Habib Benzaama; Mohamed Mokhtari; Miloud Abbes Tahar

doi:10.3221/IGF-ESIS.55.17

Influence of contact parameters in fretting-fatigue contact 3D problems

Authors

Fella Hamadouche Laboratory of Biomechanics and Biomaterials,National Polytechnic School of Oran ENPO, Algeria
Habib Benzaama Laboratory of Biomechanics and Biomaterials,National Polytechnic School of Oran ENPO, Algeria
Mohamed Mokhtari Laboratory of Biomechanics and Biomaterials,National Polytechnic School of Oran ENPO, Algeria https://orcid.org/0000-0001-7255-2312
Miloud Abbes Tahar Laboratory of Mechanical and Energy, University of Hassiba Benbouali, chlef, Algeria

DOI:

https://doi.org/10.3221/IGF-ESIS.55.17

Keywords:

Fretting fatigue, Finite Element Method, 3 dimensions, crack and the stress intensity factors

Abstract

A numerical study on the influence of contact parameters on fretting fatigue behavior is carried out by using a new method SFEM (Stretching Finite Element Method) is presented in this article. Several parameters are made to vary: geometric shapes of the mesh, materials and contact parameters. The three-dimensional parametric model is composed by specimen and a pad in full contact. A Fortran Code is used to generate the parametric mesh. The stress intensity factors are calculated by varying the above contact parameters and the stress intensity factor under modes I, II and III are computed..

Downloads

Download data is not yet available.

Downloads

Visual Abstract

Published

28-12-2020

Issue

Vol. 15 No. 55 (2021): January 2021

Section

Fatigue

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.

Open Access Statement

Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.

How to Cite

Influence of contact parameters in fretting-fatigue contact 3D problems . (2020). Frattura Ed Integrità Strutturale, 15(55), 228-240. https://doi.org/10.3221/IGF-ESIS.55.17