Response of fabric insert injection overmolding PP based composites subjected to single and muti-impact
Impact response of fabric insert injection overmolding PP based composites
DOI:
https://doi.org/10.3221/IGF-ESIS.48.25Keywords:
Composites, Impact response, Injection overmoldingAbstract
This paper presents the results of a current study on the development and impact response of composite plates manufactured by injection overmolding on the two sides of a single reinforcement fibre mat. The injection polymer is a talc-filled polypropylene, nowadays used for structural purposes. Three configurations with different insert fibre mats were used: Kevlar, biaxial and multiaxial glass fibre mats. The parameters studied were the fibre mat type and the impact energy. For single impact tests, it was concluded that the highest impact energy required to achieve impactor perforation is obtained with Kevlar insert, while the highest percentage of energy recovered is achieved with biaxial glass fibre netting. Kevlar insert also allows for the maximum impact stiffness. For the multi-impact tests, the recovered energy and the dynamic stiffness show the same tendencies of the single impact tests. On low energy impacts, the effect of the insert fibre and of the previous impact are quite reduced, while for impact energies above 6J, previous impacts reduce significantly the recovered energy and the impact energy for which the perforation was achieved.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.