Study on the abrasion property of the anvil inside a hydraulic DTH hammer fitted with horizontal oriented sliders
DOI:
https://doi.org/10.3221/IGF-ESIS.42.28Keywords:
Horizontal oriented slider, Hydraulic hammer, Anvil, Abrasion rate, Directional well drillingAbstract
Hydraulic hammers have been extensively applied to horizontal directional well drilling in hard rock formations. However, the service life of a hydraulic hammer is still unsatisfactory due to the heavy wear or abrasion of the horizontal anvil, which leads to the failure and the reduction of service life in directional well drilling. In order to improve the performance life of a hydraulic hammer, the new type of anvil with a horizontal oriented slider has been designed. The abrasion property of the horizontal oriented slider have been numerically simulated and analyzed by Finite Element Analysis. Simulation and experimental results have shown that the abrasion rate exponentially varies with the mass of the anvil and the friction coefficient of horizontal oriented slider, nevertheless the abrasion rate of horizontal anvil is almost logarithmically varies with moving velocity of oriented slider. The maximum abrasion rate of horizontal oriented sliders will exceed 4% while moving velocity of the horizontal anvil is larger than 3m/s. While the mass of the anvil is 100kg, the maximum abrasion rate of horizontal oriented slider is 7.5?. However, the maximum abrasion rate of a horizontal oriented slider will be up to 16.5% while the friction coefficient is more than 0.2.
Downloads
Published
License
Copyright (c) 2017 Fracture and Structural Integrity
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.