Analysis of fatigue behaviour of stainless steels under hydrogen influence
DOI:
https://doi.org/10.3221/IGF-ESIS.37.09Keywords:
Tension-compression fatigue, Rotating-bending fatigue, Fretting fatigue, Stainless steels, Short fatigue crack, Hydrogen influenceAbstract
Three stainless steels – ASTM 304, 316 and 316L - used in hydrogen utilization equipment are under investigation at conditions of tension-compression, rotating-bending and fretting fatigue. Fatigue tests are carried out with hydrogen charged and uncharged specimens. Hydrogen charging includes cathodic type of charging and exposure to high pressure hydrogen gas. The experiments under rotating bending and tensioncompression fatigue are conducted under different frequencies in three different laboratories: at The University of Chemical Technology and Metallurgy, Sofia, Bulgaria; at Sandia National Laboratory, California and The University of Tufts, Medford, Massachusetts, USA; The HYDROGENIUS Institute at Kyushu University, Japan. The fretting fatigue tests are presented by The HYDROGENIUS Institute at Kyushu University, Japan. The obtained results are presented in Wöhler curves complemented by plots "Short fatigue crack length– Number of cycles" and “Tangential force coefficient–Stress amplitude”. The found fatigue characteristics are analyzed and compared at different loading conditions, showing the best performance of Steel 316L.
Downloads
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.