A new formulation for estimating maximum stress intensity factor at the mid plane of a SENB specimen: Study based on 3D FEA
DOI:
https://doi.org/10.3221/IGF-ESIS.29.37Keywords:
Maximum stress intensity factorAbstract
In this investigation, three-dimensional elastic finite element analyses have been conducted to compute the stress intensity factor (KI) in a SENB specimen with varied thickness (B) and crack-length to width ratio (a/W). The results indicate that the magnitude of KI depends on B, and significantly varies along the crackfront from surface to the center of the specimen. The maximum value of KI is found at mid plane of the specimen. Based on the present 3D finite element calculations an effort is made to propose the new analytical relationship between maximum KI and specimen a/W, which helps to estimate maximum KI by only knowing specimen geometry and applied load.
Downloads
Published
Issue
Section
Categories
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.