Microstructural characterisation related to hot tearing of Al-Cu sand mould castings
DOI:
https://doi.org/10.3221/IGF-ESIS.14.07Abstract
In this paper, the hot tearing behaviour in Al-(4.8?6)%Cu sand mould castings was preliminary investigated by means of microstructural examination and image analysis. A dog-bone pattern was employed for the realisation of the castings and three Al-Cu alloys with different Cu and Si contents were used. The effects of the alloy composition and of different pouring temperatures on the hot tearing behaviour of the castings were evaluated. The quantity of the eutectic phase available during solidification is considered a very important parameter for the crack healing phenomenon, in fact the eutectic liquid flows into the hot tear areas and covers parts of the cracks. The hot tear paths and surfaces were observed by means of optical and scanning electron microscopes, which showed that the fracture surfaces were dominated by bridged grain boundaries and the presence of a liquid film, in particular at higher copper concentrations. Several samples were also drawn from the zones characterised by the maximum cross-section variation and the micrographs from the optical microscope were statistically analysed by means of commercially available image analysis software. The quantitative microstructural parameters of percentage, mean area and distribution of the eutectic phase were evaluated and correlated to the capacity of the eutectic liquid to heal open fractures caused by hot tearing for the examined alloys.Downloads
Downloads
Issue
Section
License
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Frattura ed Integrità Strutturale (Fracture and Structural Integrity, F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit and providing a link to the license and indicating if changes were made.